HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 77
Line rate configuration commands, display qos lr interface
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Line rate configuration commands display qos lr interface Syntax View display qos lr interface [ interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters interface-type interface-number: Specifies an interface by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display qos lr interface to view the line rate configuration information on a specified interface or all the interfaces. If no interface is specified, this command displays the line rate configuration information on all the interfaces. Examples # Display the line rate configuration information on all the interfaces. display qos lr interface Interface: GigabitEthernet1/0/1 Direction: Outbound CIR 64000 (kbps), CBS 4000000 (byte) Table 26 Command output Field Interface Direction CIR CBS Description Interface type and interface number Direction in which the line rate configuration is applied Committed information rate (CIR) in kbps Committed burst size (CBS) in bytes, which specifies the depth of the token bucket for holding bursty traffic 72