HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 73
qos trust
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Description Use display qos trust interface to display priority trust mode and port priority information on an interface. If no interface is specified, the command displays priority trust mode and port priority information for all interfaces. Examples # Display the priority trust mode and port priority settings of GigabitEthernet 1/0/1. display qos trust interface GigabitEthernet 1/0/1 Interface: GigabitEthernet1/0/1 Port priority information Port priority :0 Port priority trust type : dscp Table 24 Command output Field Interface Port priority Port priority trust type Description Interface type and interface number Port priority set for the interface Priority trust mode on the interface: • dscp-Uses the DSCP precedence of incoming packets for priority mapping. • dot1p-Uses the 802.1p priority of incoming packets for priority mapping. qos trust Syntax qos trust { dot1p | dscp } View undo qos trust Interface view Default level 2: System level Parameters dot1p: Uses the 802.1p priority in incoming packets for priority mapping. dscp: Uses the DSCP value in incoming packets for priority mapping. Description Use qos trust to configure an interface to use a particular priority field carried in packets for priority mapping. Use undo qos trust to restore the default priority trust mode. By default, the 802.1p priority of incoming packets is trusted. Examples # Set the trusted packet priority type to DSCP priority on GigabitEthernet 1/0/1. 68