HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 96
qos car aggregative, Table 31, Command output
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display qos car name to display the configuration and statistics of a specified aggregate CAR action. If no CAR action is specified, this command displays the configuration and statistics of all the aggregate CAR actions. Examples # Display aggregate CAR configuration. display qos car name Name: agg Mode: aggregative CIR: 256(kbps) CBS: 1024(byte) EBS: 0(byte) Green Action: pass Yellow Action: pass Red Action: discard Green packet 37(Pkts) Red packet 1(Pkts) PIR: 4096(kbps) Table 31 Command output Field Name Mode CIR CBS EBS PIR Green Action Yellow Action Red Action Green packet Red packet Description Name of the CAR action Type of the CAR action:aggregative-Aggregate CAR Parameters for the aggregate CAR action Action to take on packets: • discard-Drops the packets. • pass-Permits the packets to pass through. • remark-dot1p-pass new-cos-Sets the 802.1p priority value of the 802.1p packet to new-cos and permits the packet to pass through. • remark-dscp-pass new-dscp-Sets the DSCP value of the packet to new-dscp and permits the packet to pass through. Statistics about green packets Statistics about red packets qos car aggregative Syntax qos car car-name aggregative cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ pir peek-information-rate ] [ green action ] [ yellow action ] [ red action ] undo qos car car-name View System view Default level 2: System level 91