HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 147

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FICON-3 Error Message FICON-3-E_ASSIGN_BINDING_PN_FAIL: [chars]. Explanation Port number has FCIP or port channel binding that cannot be removed or changed. Recommended Action Remove port number binding of the logical interface first. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_ASSIGN_INVALID_PN_PARAM: [chars]. Explanation Invalid port number parameters in command. Recommended Action Check port numbers in the command. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_ASSIGN_OVERLAP_PN_FAIL: [chars]. Explanation Port number assigned to physical and logical cannot overlap. Recommended Action Check the port numbers in the command. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_ASSIGN_PN_NOT_DOWN_FAIL: [chars]. Explanation Only port number assigned to a port in the down state can be removed or changed. Recommended Action Bring down the port and then change the assigned port number. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_ASSIGN_PROHIBIT_PN_FAIL: [chars]. Explanation Logical port address cannot be prohibited. Recommended Action Check port numbers in the command. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_DUPLICATE_PN_ASSIGN_WARNING: [chars]. Explanation This port has the same port number assigned to another port in the same FICON VSAN. No more than one port should have the same port number in each FICON VSAN. Recommended Action Avoid duplicate number assignments in each FICON VSAN. Introduced Cisco MDS SAN-OS Release 3.0(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-111