HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 347

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SKSD Message Error Message SKSD-5-SKSD_MKEY_INSTALL: Installing a Master Key on the smartcard(s). Explanation Installing a new Master Key on the smart card(s). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). SPAN Messages This section contains the switched port analyzer (SPAN) messages. SPAN-2 SPAN-3 Error Message SPAN-2-MEM_FULL: Memory allocation failed. Explanation Memory allocation failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-3-IPC_FAIL: IPC Error. Explanation Internal interprocess communications (IPC) error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-3-STATELESS_RESTART: Span is restarting stateless. Explanation Because of an unrecoverable error, the switched port analyzer (SPAN) is starting stateless. The currently active sessions will not be preserved. You will have to reenter the entire configuration. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-311