HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 472

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VPM-2-PSS_ERROR: [chars]. Explanation The virtual port manager encountered an error while operating on a persistent storage database. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VPM-2-VPMON_CRIT: [chars] [dec]. Explanation The virtual port manager (VPMON) daemon experienced a critical problem. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message VPM-2-VPMON_DPP_DOWNLOAD: HB failure, Restarting the DPP [dec]. Explanation The virtual port manager (VPMON) daemon is downloading the data path processor (DPP) again. Recommended Action Intelligent switch application programming interface (ISAPI) users need to re-download the configuration data to the fast path. Introduced Cisco MDS SAN-OS Release 2.0(1b). VPM-3 Error Message VPM-2-VPMON_DPP_RELOAD_FORCE: Issuing of force reload to command for DPP(s) [chars] is: [chars]. Explanation VPMON daemon critical action message. Reason is shown in the message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message VPM-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]. Explanation Could not send persistent storage service (PSS) synchronization notification to the standby supervisor. The PSS type, operation, and key are shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-436 Cisco MDS 9000 Family System Messages Reference OL-15956-01