HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 169

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPCONF-6-ROUTE_NOT_ACTIVE: The [chars] is not active. Explanation The specified route is successfully configured but currently is not active. Recommended Action Check that the route is correct and the outgoing interface is operationally up. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPCONF-6-STARTING: IP configuration Manager started. Explanation The IP configuration manager service has successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). IPFC Messages This section contains the IP over Fibre Channel (IPFC) messages. IPFC-2 IPFC-3 Error Message IPFC-2-ALLOC_MEMORY: Memory allocation failed. Explanation The service failed to allocate a block of dynamic memory. Recommended Action Check if the system is low on memory and reset the switch if necessary. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPFC-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start. The failure occurred while initializing the component shown in the error message. Recommended Action Enter show processes to check the status of the other processes,. Debug the specified component. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-133