HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 490

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message WWN-2-TYPE1_CRIT: [dec] (< [dec] %) Remain. Explanation The WWN manager has only the shown percent or less of WWNs remaining. Recommended Action Add additional WWNs by programming a new secondary MAC address and its range. Introduced Cisco MDS SAN-OS Release 1.2(2a). WWN-3 Error Message WWN-2-TYPES2_5_CRIT: [dec] (< [dec] %) Remain. Explanation The WWN manager has only the shown percent or less of the WWNs of Network Address Authority (NAA) types 2 and 5 remaining. Recommended Action Add additional WWNs by programming a new secondary MAC address and its range. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]. Explanation Could not send persistent storage service (PSS) synchronization notification to the standby supervisor module. PSS type, operation, and key are shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-3-RELEASE_ERR: Cant Rel. WWN [chars]. Explanation WWN manager received a request to release a WWN that cannot be released. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-3-RELEASE_ERR_UNKNOWN: Unknown WWN [chars] [chars]. Explanation WWN manager received a request to release a WWN that could not have been allocated by this WWN manager because of the reason shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-454 Cisco MDS 9000 Family System Messages Reference OL-15956-01