HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 396
clock set, Technical Support.
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 396 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC_BATTERY-SLOT#-2-BATTERY_NOT_PRESENT: Battery [dec] is not present. Explanation The module does not have a sufficient number of batteries. Two batteries are needed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC_BATTERY-SLOT#-2-CHARGING_DISABLED: Temperature outside permitted range for battery charging (5C-40C). Explanation The temperature of the module is not within the range to permit battery charging. Recommended Action Make sure the temperature of the module is between 5 and 400C. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SVC_BATTERY-SLOT#-2-CHARGING_FAILURE: Charging failure in battery [dec] ([hex]). Explanation The module encountered failures while charging a battery. Recommended Action Replace the battery. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC_BATTERY-SLOT#-2-CLOCK_INCORRECT: System clock is running behind, battery conditioning will be affected. Explanation The system clock is running behind the actual time. This will affect the battery conditioning. Recommended Action Enter the clock set CLI command or use an equivalent Fabric Manager/Device Manager procedure to set the correct time. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SVC_BATTERY-SLOT#-2-COMMUNICATION_FAILURE: Communication failure with battery [dec]. Explanation The module encountered failures while communicating with a battery. Recommended Action Replace the battery. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-360 Cisco MDS 9000 Family System Messages Reference OL-15956-01