HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 420

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSMGR-3-PARTIAL_CFGWRITE_FAILED: Partial configuration copy failed (error-id [hex]). Explanation The requested configuration copy has failed. The error message shows the error ID representing the failure reason. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-3-PARTIAL_CFGWRITE_VER_MISMATCH: Startup-config version not same as current software version. Explanation Startup configuration version not same as current software version. Recommended Action Enter the copy running startup CLI command or use a similar Fabric Manager/Device Manager procedure, and try again. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSMGR-3-RTDBCTRL_SRVTIMEOUT: Service [chars] failed to respond back to System Manager in the specified timeout period. Explanation A required service has failed to send a response after receiving a request for the fabric switch upgrade. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message SYSMGR-3-RTDBCTRL_SRVTIMEOUT: Service [chars] failed to respond to the request to return its runtime database in the timeout period. Explanation A required service failed to save the runtime database after a request to stop communication. Saving of the runtime database failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message SYSMGR-3-SERVICE_CRASHED: Service "[chars]" (PID [dec]) hasn't caught signal [dec][chars] Explanation A service has terminated its execution abnormally. The service might be restarted, depending on the High Availability policies implemented for the service. Recommended Action Use the show process CLI command to verify that the service has been restarted. Introduced Cisco MDS SAN-OS Release 1.0(2a). 2-384 Cisco MDS 9000 Family System Messages Reference OL-15956-01