HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 203

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ISAPI-SLOT#-7-SSM_DEBUG: [chars]. Explanation This is an intelligent switch API debug software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). ISNS Messages This section contains the Internet Storage Name Service (ISNS) messages. ISNS-2 Error Message ISNS-2-ISNS_CFS_OPERATION_FAILED: iSNS CFS [chars] failed. Explanation iSNS CFS operation failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message ISNS-2-ISNS_INIT: iSNS initialization of [chars] [chars]. Explanation Internet Storage Name Service (ISNS) initialization failed. ISNS is automatically restarted. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). IVR Messages This section contains the inter-VSAN routing (IVR) messages. IVR-2 Error Message IVR-2-CFS_PEER_LOST_WITHIN_SESSION: CFS peer with switch wwn [chars] was lost in the middle of an active CFS session. Abort the CFS session and re-enter the configuration changes. Explanation Due to port flaps (enable and disable of the VSAN), link outages, switch restarts and so on, a CFS peer switch of IVR was lost. The current configuration changes would not be applied to this peer until the peer merges with this switch. The CFS merge may fail if the configuration at the lost peer conflicts with the changes made in this session. Also, IVR auto topology could be out OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-167