HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 488

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] WWN Messages This section contains the World Wide Name (WWN) messages. WWN-1 Error Message WWN-1-TYPE1_ALERT: [dec] (< [dec] %) Remain. Explanation The WWN manager has run out of WWNs. No new dynamically allocated WWNs are available. However, statically assigned WWNs such as switch WWN, port WWN, and so on are still available. Recommended Action Add additional WWNs by programming a new secondary MAC address and its range. Introduced Cisco MDS SAN-OS Release 1.2(2a). WWN-2 Error Message WWN-1-TYPES2_5_ALERT: [dec] (< [dec] %) Remain. Explanation The WWN manager has run out of WWNs of NAA (Network Address Authority) types 2 and 5. Recommended Action Add additional WWNs by programming a new secondary MAC address and its range. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-2-BKPLN_PROM_CANT_READ: Can not read backplane PROM. Explanation The WWN manager has failed to read chassis information. No dynamic WWNs could be allocated. Recommended Action Copy the error message exactly as it appears on the console or in the system log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-2-EXITING: Exited due to [chars]. Explanation The WWN manager process has exited because of the error shown in the error message. The process has probably been restarted automatically. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-452 Cisco MDS 9000 Family System Messages Reference OL-15956-01