HP Integrity Superdome SX1000 Windows Integrity Management Agents Reference - Page 43

IO Fan Module as soon as possible following the IO Fan Module Remove and Replace

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Event ID Event Severity Event Description 7824 Warning The BPSs for the cabinet are illegally configured. Data Byte 3 = PDCA number. Probable Cause: The BPS are installed in an illegal configuration. Recommended Action: Re-configure the BPS in a manner consistent with the explanation in the Problem Description statement SNMP Trap: hpevtIllegalBpsCfgOrPhaseFlt - 7824 in HPIFPTRAP.MIB. 7825 Warning BPS ID received from installed Bulk Power Supply was unknown Probable Cause: The designated power supply is responding with an illegal BPS ID. It could be a faulty supply, a different revision, or a wrong supply in the wrong box. Recommended Action: Replace this Bulk Power Supply with a proper one. SNMP Trap: hpevtIllegalBpsid - 7825 in HPIFPTRAP.MIB. 7827 Error Ambient Air Sensor Overtemp Warning Probable Cause: Room Temperature has risen to a critical level. Recommended Action: Shutdown and power off the system. Correct air temperature problem. SNMP Trap: hpevtInletOvertempHi - 7827 in HPIFPTRAP.MIB. 7828 Warning Ambient Air Sensor Overtemp Warning Probable Cause: Room Temperature is rising or falling. Recommended Action: Check the error log's previous entries within a logical time frame. If temperature is rising, prepare for system shutdown. If temperature is dropping, then problem is probably resolved. SNMP Trap: hpevtInletOvertempLo - 7828 in HPIFPTRAP.MIB. 7829 Error Ambient Air Sensor Overtemp Warning Probable Cause: Room Temperature is rising or falling. Recommended Action: Check the error log's previous entries within a logical time frame. If temperature is rising, prepare for system shutdown. If temperature is dropping, then problem is probably resolved. SNMP Trap: hpevtInletOvertempMid - 7829 in HPIFPTRAP.MIB. 7836 Warning IO Fan Failed Probable Cause: IO Cooling Fan Failed Recommended Action: Replace IO Fan Module as soon as possible following the IO Fan Module Remove and Replace Procedures. SNMP Trap: hpevtIofanFail - 7836 in HPIFPTRAP.MIB. 7842 Warning Cabinet Power System is in overload. Probable Cause: A Bulk Power Supply has failed, or, entities were added. Look for one or more BPS_Fail Chassis Codes preceding this one for the actual failures. This code is a warning of possible cabinet unreliability. Recommended Action: Contact HP Support personnel to troubleshoot the problem. SNMP Trap: hpevtPowerOverload - 7842 in HPIFPTRAP.MIB. 7845 Error Cabinet Shutdown - Insufficient Blowers Probable Cause: One blower has failed creating condition N. Before condition N was corrected, another blower in the same cabinet was declared failed. This created the illegal condition of N-1. Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtShutdownBlowr - 7845 in HPIFPTRAP.MIB. 7846 Error Cabinet Shutdown - Insufficient IO Fans Probable Cause: One IO fan has failed creating condition N. Before condition N was corrected, another IO fan in the same cabinet failed. This created the illegal condition of N-1. Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtShutdownIofan - 7846 in HPIFPTRAP.MIB. 7849 Warning IO Expansion Utility Cabinet Fan Failed Probable Cause: IO Expansion Utility Fan or Fan sensor failure PM failure Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtXucFanFail - 7849 in HPIFPTRAP.MIB. 7855 Error Watchdog Timer Expired Probable Cause: CLU has been reset after a firmware update. Recommended Action: No action is required. SNMP Trap: hpevtCluWatchdogReset - 7855 in HPIFPTRAP.MIB. Platform Agent Events 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Event Description
Event Severity
Event ID
The BPSs for the cabinet are illegally configured. Data Byte 3 = PDCA number.
Probable Cause: The BPS are installed in an illegal configuration. Recommended
Action: Re-configure the BPS in a manner consistent with the explanation in the
Problem Description statement SNMP Trap: hpevtIllegalBpsCfgOrPhaseFlt - 7824 in
HPIFPTRAP.MIB.
Warning
7824
BPS ID received from installed Bulk Power Supply was unknown Probable Cause:
The designated power supply is responding with an illegal BPS ID. It could be a
faulty supply, a different revision, or a wrong supply in the wrong box. Recommended
Action: Replace this Bulk Power Supply with a proper one. SNMP Trap:
hpevtIllegalBpsid - 7825 in HPIFPTRAP.MIB.
Warning
7825
Ambient Air Sensor Overtemp Warning Probable Cause: Room Temperature has
risen to a critical level. Recommended Action: Shutdown and power off the system.
Correct air temperature problem. SNMP Trap: hpevtInletOvertempHi - 7827 in
HPIFPTRAP.MIB.
Error
7827
Ambient Air Sensor Overtemp Warning Probable Cause: Room Temperature is rising
or falling. Recommended Action: Check the error log's previous entries within a
logical time frame. If temperature is rising, prepare for system shutdown. If
temperature is dropping, then problem is probably resolved. SNMP Trap:
hpevtInletOvertempLo - 7828 in HPIFPTRAP.MIB.
Warning
7828
Ambient Air Sensor Overtemp Warning Probable Cause: Room Temperature is rising
or falling. Recommended Action: Check the error log's previous entries within a
logical time frame. If temperature is rising, prepare for system shutdown. If
temperature is dropping, then problem is probably resolved. SNMP Trap:
hpevtInletOvertempMid - 7829 in HPIFPTRAP.MIB.
Error
7829
IO Fan Failed Probable Cause: IO Cooling Fan Failed Recommended Action: Replace
IO Fan Module as soon as possible following the IO Fan Module Remove and Replace
Procedures. SNMP Trap: hpevtIofanFail - 7836 in HPIFPTRAP.MIB.
Warning
7836
Cabinet Power System is in overload. Probable Cause: A Bulk Power Supply has
failed, or, entities were added. Look for one or more BPS_Fail Chassis Codes preceding
this one for the actual failures. This code is a warning of possible cabinet unreliability.
Recommended Action: Contact HP Support personnel to troubleshoot the problem.
SNMP Trap: hpevtPowerOverload - 7842 in HPIFPTRAP.MIB.
Warning
7842
Cabinet Shutdown - Insufficient Blowers Probable Cause: One blower has failed
creating condition N. Before condition N was corrected, another blower in the same
cabinet was declared failed. This created the illegal condition of N-1. Recommended
Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap:
hpevtShutdownBlowr - 7845 in HPIFPTRAP.MIB.
Error
7845
Cabinet Shutdown - Insufficient IO Fans Probable Cause: One IO fan has failed
creating condition N. Before condition N was corrected, another IO fan in the same
cabinet failed. This created the illegal condition of N-1. Recommended Action: Contact
HP Support personnel to troubleshoot the problem SNMP Trap: hpevtShutdownIofan
- 7846 in HPIFPTRAP.MIB.
Error
7846
IO Expansion Utility Cabinet Fan Failed Probable Cause: IO Expansion Utility Fan
or Fan sensor failure PM failure Recommended Action: Contact HP Support personnel
to troubleshoot the problem SNMP Trap: hpevtXucFanFail - 7849 in HPIFPTRAP.MIB.
Warning
7849
Watchdog Timer Expired Probable Cause: CLU has been reset after a firmware
update. Recommended Action: No action is required. SNMP Trap:
hpevtCluWatchdogReset - 7855 in HPIFPTRAP.MIB.
Error
7855
Platform Agent Events
43