HP Integrity Superdome SX1000 Windows Integrity Management Agents Reference - Page 58
Error reading the local cell's XIN link state Probable Cause: Hardware Access Error.
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Event ID Event Severity Event Description 8966 Error Couldn't determine the complex fabric topology Probable Cause: Fabric Access Error. Couldn't write this XBC. Recommended Action: Contact HP Support personnel to analyze the fabric. SNMP Trap: hpevtFabricRtgCompleteTopologyErr - 8966 in HPIFPTRAP.MIB. 8968 Warning Error checking a cell to cell link during traversability tests Probable Cause: Probably an error reading the XIN. Look for additional descriptive chassis codes. Recommended Action: Contact HP Support personnel to check the CC SNMP Trap: hpevtFabricRouteTraversableCc2CcErr - 8968 in HPIFPTRAP.MIB. 8969 Warning An error occurred while traversing the cell to cell link. Probable Cause: Probably an error reading the XIN. Look for additional descriptive chassis codes. Recommended Action: Contact HP Support personnel to check the CC SNMP Trap: hpevtFabricDataRouteTraversableCc2CcErr - 8969 in HPIFPTRAP.MIB. 8970 Warning Error reading the local cell's XIN link state Probable Cause: Hardware Access Error. Have your HP support representative check the Coherency Controller (CC). SNMP Trap: hpevtFabricCc2ccTraverseLclXinRdErr - 8970 in HPIFPTRAP.MIB. 8971 Warning Error reading the remote cell's XIN link state register Probable Cause: Hardware Access Error. Have your HP support representative check the backplane and Coherency Controller (CC). SNMP Trap: hpevtFabricCc2ccTraverseRmtXinRdErr 8971 in HPIFPTRAP.MIB. 8972 Warning The XIN link is not connected to the target cell. Probable Cause: Ensure the cells are connected. Check historical chassis codes from most recent boot to see if the link had ever initialized. Have your HP support representative check the backplane and Coherency Controller (CC). SNMP Trap: hpevtFabricCc2ccTraverseLclNotInit - 8972 in HPIFPTRAP.MIB. 8973 Warning The XIN link is not connected to the target cell. Probable Cause: Ensure the cells are connected. Check historical chassis codes from most recent boot to see if the link had ever initialized. Have your HP support representative check the backplane and Coherency Controller (CC). SNMP Trap: hpevtFabricCc2ccTraverseRmtNotInit 8973 in HPIFPTRAP.MIB. 8974 Warning Error reading the XIN_LINK_STATE register while disabling the link Probable Cause: Hardware Access Error. Recommended Action: Contact HP Support personnel to analyze the fabric, CC, Backplane. SNMP Trap: hpevtFabricDisableXinLinkReadErr - 8974 in HPIFPTRAP.MIB. 8975 Error Error reading the XIN_LINK_STATE register Probable Cause: link init problem Recommended Action: Contact HP Support personnel to check the XBC, CC, backplane SNMP Trap: hpevtFabricXinInitRetryReadErr - 8975 in HPIFPTRAP.MIB. 8976 Warning Unexpected fabric firmware error Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. SNMP Trap: hpevtFabricAssertFabricCc - 8976 in HPIFPTRAP.MIB. 8979 Warning The CPU is performance or functionally restricted Probable Cause: A CPU is broken. Replace it. SNMP Trap: hpevtCpuRestricted - 8979 in HPIFPTRAP.MIB. 8981 Warning The RTC was found to be invalid and has been cleared Probable Cause: The RTC was invalid Recommended Action: No action is required. The problem has been corrected by SFW. SNMP Trap: hpevtPdhInvalidRtcCleared - 8981 in HPIFPTRAP.MIB. 8982 Warning Status indicates that the Late Self Tests did not actually run Probable Cause: This could be caused by an incompatibity problem between PAL and the CPUs. Check that PAL supports all the CPUs installed on the system. SNMP Trap: hpevtLstNotRun - 8982 in HPIFPTRAP.MIB. 58 Management Agents Event Tables