HP Integrity Superdome SX1000 Windows Integrity Management Agents Reference - Page 77

In SetupNCTable, a write to the GLOBAL_LINK_SEL_NONCOH CSR failed. Data

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

Event ID Event Severity Event Description 10414 Warning In SetupNCTable, a write to the GLOBAL_LINK_SEL_NONCOH CSR failed. Data field: (data written to CSR) | (actual CSR data read 32). Probable Cause: System firmware was unable to write a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtNctTblWrtGlobLnkSelNonCohFail - 10414 in HPIFPTRAP.MIB. 10415 Warning SetupNCTable failed in ArfPhase3. Data field: cell set passed in to SetupNCTable Probable Cause: System firmware was unable to write some fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtNctTblFailArfPhs3 - 10415 in HPIFPTRAP.MIB. 10427 Warning A failure occurred while prepping a back-to-back system for post-rendezvous Arches Fabric setup. Data field: return value from Phase4BackToBackPrep. Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtPostRndevzFailPrepBckToBckSys - 10427 in HPIFPTRAP.MIB. 10429 Warning ArfPhase4 was unable to set up the Non-Coherent link select to at least one cell in its alive/gsm sharing set. Data field: bitmap of unreachable cells. Probable Cause: System firmware was unable to find valid routes to each cell in a previously good partition. Possible cable/connection problems. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtArfPhs4UnablSetNonCohLnk - 10429 in HPIFPTRAP.MIB. 10431 Warning Unable to set the Non-Coherent route. Data field: (sourceCell 32) | (cell set passed in to SetupNCTable). Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtUnablSetNonCohRout - 10431 in HPIFPTRAP.MIB. 10432 Warning Unable to setup the Coherent route table for a cell in our partition. Data field: (sourceCell 32) | (cell set passed in to SetupCohTable). Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtUnableSetCohRoutCel - 10432 in HPIFPTRAP.MIB. 10435 Warning Error writing the XBC ROUTE_TABLE_ENABLE_MASK CSR. Data field: (route set to disable) | (xbcNum 32) | (xbc port 48). Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtErrWrtXbcRoutTblEnblMskCsr - 10435 in HPIFPTRAP.MIB. 10436 Warning The Arches Fabric vertex module returned an unexpected error during Non-Coherent table setup. Data field: (return value) | (sourceCell 32) | (dest cell 48). Probable Cause: Internal firmware error or data corruption. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtVertxRetUnxpctErrNonCohTbl - 10436 in HPIFPTRAP.MIB. 10439 Warning A write to a Skyline Global LINK_SEL_COHx CSR failed. Data field: cell number of the Skyline that failed. Probable Cause: System firmware was unable to write a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtWrtSkyGlobLnkSelCohFail - 10439 in HPIFPTRAP.MIB. 10475 Warning Unable to write the XBC port scratch CSR with the routing state. Data field: (routing state) | (xbcNum 32) | (portNum 48). Probable Cause: System firmware was unable to write a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtUnablWrtXbcPrtCsr - 10475 in HPIFPTRAP.MIB. Platform Agent Events 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Event Description
Event Severity
Event ID
In SetupNCTable, a write to the GLOBAL_LINK_SEL_NONCOH CSR failed. Data
field: (data written to CSR) | (actual CSR data read 32). Probable Cause: System
firmware was unable to write a fabric hardware register. Recommended Action:
Capture IPMI event logs, look for additional errors. Contact your HP Support
Representative to analyze the fabric SNMP Trap:
hpevtNctTblWrtGlobLnkSelNonCohFail - 10414 in HPIFPTRAP.MIB.
Warning
10414
SetupNCTable failed in ArfPhase3. Data field: cell set passed in to SetupNCTable
Probable Cause: System firmware was unable to write some fabric hardware registers.
Recommended Action: Capture IPMI event logs, look for additional errors. Contact
your HP Support Representative to analyze the fabric SNMP Trap:
hpevtNctTblFailArfPhs3 - 10415 in HPIFPTRAP.MIB.
Warning
10415
A failure occurred while prepping a back-to-back system for post-rendezvous Arches
Fabric setup. Data field: return value from Phase4BackToBackPrep. Probable Cause:
System firmware was unable to write various fabric hardware registers.
Recommended Action: Capture IPMI event logs, look for additional errors. Contact
your HP Support Representative to analyze the fabric SNMP Trap:
hpevtPostRndevzFailPrepBckToBckSys - 10427 in HPIFPTRAP.MIB.
Warning
10427
ArfPhase4 was unable to set up the Non-Coherent link select to at least one cell in
its alive/gsm sharing set. Data field: bitmap of unreachable cells. Probable Cause:
System firmware was unable to find valid routes to each cell in a previously good
partition. Possible cable/connection problems. Recommended Action: Capture IPMI
event logs, look for additional errors. Contact your HP Support Representative to
analyze the fabric SNMP Trap: hpevtArfPhs4UnablSetNonCohLnk - 10429 in
HPIFPTRAP.MIB.
Warning
10429
Unable to set the Non-Coherent route. Data field: (sourceCell 32) | (cell set passed
in to SetupNCTable). Probable Cause: System firmware was unable to write various
fabric hardware registers. Recommended Action: Capture IPMI event logs, look for
additional errors. Contact your HP Support Representative to analyze the fabric
SNMP Trap: hpevtUnablSetNonCohRout - 10431 in HPIFPTRAP.MIB.
Warning
10431
Unable to setup the Coherent route table for a cell in our partition. Data field:
(sourceCell 32) | (cell set passed in to SetupCohTable). Probable Cause: System
firmware was unable to write various fabric hardware registers. Recommended
Action: Capture IPMI event logs, look for additional errors. Contact your HP Support
Representative to analyze the fabric SNMP Trap: hpevtUnableSetCohRoutCel - 10432
in HPIFPTRAP.MIB.
Warning
10432
Error writing the XBC ROUTE_TABLE_ENABLE_MASK CSR. Data field: (route set
to disable) | (xbcNum 32) | (xbc port 48). Probable Cause: System firmware was
unable to write various fabric hardware registers. Recommended Action: Capture
IPMI event logs, look for additional errors. Contact your HP Support Representative
to analyze the fabric SNMP Trap: hpevtErrWrtXbcRoutTblEnblMskCsr - 10435 in
HPIFPTRAP.MIB.
Warning
10435
The Arches Fabric vertex module returned an unexpected error during Non-Coherent
table setup. Data field: (return value) | (sourceCell 32) | (dest cell 48). Probable Cause:
Internal firmware error or data corruption. Recommended Action: Capture IPMI
event logs, look for additional errors. Contact your HP Support Representative to
analyze the fabric SNMP Trap: hpevtVertxRetUnxpctErrNonCohTbl - 10436 in
HPIFPTRAP.MIB.
Warning
10436
A write to a Skyline Global LINK_SEL_COHx CSR failed. Data field: cell number of
the Skyline that failed. Probable Cause: System firmware was unable to write a fabric
hardware register. Recommended Action: Capture IPMI event logs, look for additional
errors. Contact your HP Support Representative to analyze the fabric SNMP Trap:
hpevtWrtSkyGlobLnkSelCohFail - 10439 in HPIFPTRAP.MIB.
Warning
10439
Unable to write the XBC port scratch CSR with the routing state. Data field: (routing
state) | (xbcNum 32) | (portNum 48). Probable Cause: System firmware was unable
to write a fabric hardware register. Recommended Action: Capture IPMI event logs,
look for additional errors. Contact your HP Support Representative to analyze the
fabric SNMP Trap: hpevtUnablWrtXbcPrtCsr - 10475 in HPIFPTRAP.MIB.
Warning
10475
Platform Agent Events
77