HP Integrity Superdome SX1000 Windows Integrity Management Agents Reference - Page 87

Failure reading IO backplane LPM. Probable Cause: IO backplane LPM is

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Event ID Event Severity Event Description 11468 Error Clock fault for clocks supplied from the Redundant Clock Source (RCS) board to the system backplane. RCS board is no longer providing clocks to the backplane. The data field contains the physical location of the RCS. Probable Cause: RCS assembly has reported a fault. Recommended Action: Check RCS assembly. SNMP Trap: hpevtRcsNoProvClkBckPln - 11468 in HPIFPTRAP.MIB. 11471 Error Clock fault for clocks supplied from the Hot Swap Oscillator (HSO) board to the system backplane. HSO has reported a fault or has been removed. The data field contains the physical location of the HSO. Probable Cause: HSO assembly has reported a fault or has been removed. Recommended Action: Check HSO assembly. SNMP Trap: hpevtHsoFaultOrRemv - 11471 in HPIFPTRAP.MIB. 11478 Warning The operational clock frequencies do not match between the Redundant Clock Source (RCS) and the Hot Swap Oscillator (HSO). The data field contains the physical location of the HSO. Probable Cause: Operating frequency of the HSO does not match that of the RCS. Recommended Action: Check HSO assembly. SNMP Trap: hpevtOpClkNoMtchRcsHso - 11478 in HPIFPTRAP.MIB. 11479 Error The clock margin of the system backplane failed. SNMP Trap: hpevtClkMrgnBckPlnFail - 11479 in HPIFPTRAP.MIB. 11481 Warning System backplane Hot Swap Oscillator (HSO) boards are NOT redundant. Probable Cause: HSO assembly has been removed or has a fault condition. Recommended Action: look for additional events describing action to take. SNMP Trap: hpevtHsoNoRedund - 11481 in HPIFPTRAP.MIB. 11482 Error System backplane Hot Swap Oscillator (HSO) boards are insufficient. Probable Cause: There are no HSO present or all clock sources have faulted. Recommended Action: Look for additional events describing action to take. SNMP Trap: hpevtHsoInsuff 11482 in HPIFPTRAP.MIB. 11483 Warning Failure reading Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards EEPROM. Probable Cause: device is not accessible over i2c Recommended Action: check HSO + RCS boards SNMP Trap: hpevtFailRdRcsHso - 11483 in HPIFPTRAP.MIB. 11484 Error Failure writing Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check HSO and RCS boards SNMP Trap: hpevtFailWrtRcsHso - 11484 in HPIFPTRAP.MIB. 11485 Error Failure reading the Reset and Power Monitors (RPM) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power. SNMP Trap: hpevtFailRdRpm - 11485 in HPIFPTRAP.MIB. 11486 Error Failure writing the Reset and Power Monitors (RPM) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power SNMP Trap: hpevtFailWrtRpm - 11486 in HPIFPTRAP.MIB. 11487 Error Failure reading the Onboard System Programmers (OSP) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power. SNMP Trap: hpevtFailRdOsp - 11487 in HPIFPTRAP.MIB. 11488 Error Failure writing the Onboard System Programmers (OSP) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power SNMP Trap: hpevtFailWrtOsp - 11488 in HPIFPTRAP.MIB. 11489 Error SBS fault on startup. Probable Cause: SBS block for one of the MOAB's has reported an error on startup. Recommended Action: check backplane power. The physical location of the MOAB reporting the error is provided by data field. 0xFFFFXXFFFFFFFFFF where XX is: XX = 0x00 - Moab 0x00 XX = 0x01 - Moab 0x01 XX = 0x02 - Moab 0x02 XX = 0x10 - Moab 0x40 XX = 0x11 - Moab 0x41 XX = 0x12 Moab 0x42 SNMP Trap: hpevtSbsFaultStrt - 11489 in HPIFPTRAP.MIB. 11495 Warning Failure reading IO backplane LPM. Probable Cause: IO backplane LPM is not accessible over i2c. Recommended Action: Check power status of IO backplane. SNMP Trap: hpevtFailRdIObckPlnLpm - 11495 in HPIFPTRAP.MIB. Platform Agent Events 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Event Description
Event Severity
Event ID
Clock fault for clocks supplied from the Redundant Clock Source (RCS) board to the
system backplane. RCS board is no longer providing clocks to the backplane. The
data field contains the physical location of the RCS. Probable Cause: RCS assembly
has reported a fault. Recommended Action: Check RCS assembly. SNMP Trap:
hpevtRcsNoProvClkBckPln - 11468 in HPIFPTRAP.MIB.
Error
11468
Clock fault for clocks supplied from the Hot Swap Oscillator (HSO) board to the
system backplane. HSO has reported a fault or has been removed. The data field
contains the physical location of the HSO. Probable Cause: HSO assembly has reported
a fault or has been removed. Recommended Action: Check HSO assembly. SNMP
Trap: hpevtHsoFaultOrRemv - 11471 in HPIFPTRAP.MIB.
Error
11471
The operational clock frequencies do not match between the Redundant Clock Source
(RCS) and the Hot Swap Oscillator (HSO). The data field contains the physical location
of the HSO. Probable Cause: Operating frequency of the HSO does not match that
of the RCS. Recommended Action: Check HSO assembly. SNMP Trap:
hpevtOpClkNoMtchRcsHso - 11478 in HPIFPTRAP.MIB.
Warning
11478
The clock margin of the system backplane failed. SNMP Trap:
hpevtClkMrgnBckPlnFail - 11479 in HPIFPTRAP.MIB.
Error
11479
System backplane Hot Swap Oscillator (HSO) boards are NOT redundant. Probable
Cause: HSO assembly has been removed or has a fault condition. Recommended
Action: look for additional events describing action to take. SNMP Trap:
hpevtHsoNoRedund - 11481 in HPIFPTRAP.MIB.
Warning
11481
System backplane Hot Swap Oscillator (HSO) boards are insufficient. Probable Cause:
There are no HSO present or all clock sources have faulted. Recommended Action:
Look for additional events describing action to take. SNMP Trap: hpevtHsoInsuff -
11482 in HPIFPTRAP.MIB.
Error
11482
Failure reading Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards
EEPROM. Probable Cause: device is not accessible over i2c Recommended Action:
check HSO + RCS boards SNMP Trap: hpevtFailRdRcsHso - 11483 in
HPIFPTRAP.MIB.
Warning
11483
Failure writing Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards
EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action:
check HSO and RCS boards SNMP Trap: hpevtFailWrtRcsHso - 11484 in
HPIFPTRAP.MIB.
Error
11484
Failure reading the Reset and Power Monitors (RPM) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power.
SNMP Trap: hpevtFailRdRpm - 11485 in HPIFPTRAP.MIB.
Error
11485
Failure writing the Reset and Power Monitors (RPM) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power
SNMP Trap: hpevtFailWrtRpm - 11486 in HPIFPTRAP.MIB.
Error
11486
Failure reading the Onboard System Programmers (OSP) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power.
SNMP Trap: hpevtFailRdOsp - 11487 in HPIFPTRAP.MIB.
Error
11487
Failure writing the Onboard System Programmers (OSP) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power
SNMP Trap: hpevtFailWrtOsp - 11488 in HPIFPTRAP.MIB.
Error
11488
SBS fault on startup. Probable Cause: SBS block for one of the MOAB's has reported
an error on startup. Recommended Action: check backplane power. The physical
location of the MOAB reporting the error is provided by data field.
0xFFFFXXFFFFFFFFFF where XX is: XX = 0x00 - Moab 0x00 XX = 0x01 - Moab 0x01
XX = 0x02 - Moab 0x02 XX = 0x10 - Moab 0x40 XX = 0x11 - Moab 0x41 XX = 0x12 -
Moab 0x42 SNMP Trap: hpevtSbsFaultStrt - 11489 in HPIFPTRAP.MIB.
Error
11489
Failure reading IO backplane LPM. Probable Cause: IO backplane LPM is not
accessible over i2c. Recommended Action: Check power status of IO backplane.
SNMP Trap: hpevtFailRdIObckPlnLpm - 11495 in HPIFPTRAP.MIB.
Warning
11495
Platform Agent Events
87