HP Integrity Superdome SX1000 Windows Integrity Management Agents Reference - Page 67

PDC failed to read the HV Flag in the Partition Configuration Data Probable Cause

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Event ID Event Severity Event Description 9682 Warning Firmware unable to relocate VGA BIOS Probable Cause: Most likely there is a permanent memory error in the VGA BIOS region (physical address 0xc0000 - 0xdffff). Recommended Action: Replace the DIMM causing the permanent memory error in the VGA BIOS region. The PDT reports which DIMM is causing errors in the physical address range 0xc0000 - 0xdffff. SNMP Trap: hpevtVgaBiosRelocFail - 9682 in HPIFPTRAP.MIB. 9685 Error The Compatibility Matrix stored in NVRAM has a checksum error Probable Cause: NVRAM has become corrupt. Restore from a backup. SNMP Trap: hpevtCompMatrixXsumError - 9685 in HPIFPTRAP.MIB. 9695 Error PDC failed its attempt to get default RDR values Probable Cause: Hardware problem with the CPU. Recommended Action: Contact HP Support to confirm the CPU is functioning properly. SNMP Trap: hpevtBootGetDefaultRdrsFailed - 9695 in HPIFPTRAP.MIB. 9696 Error PDC could not read current RDR values of the executing CPU Probable Cause: Hardware problem with the CPU. Recommended Action: Contact HP Support to confirm the CPU is functioning properly. SNMP Trap: hpevtBootGetCurrentRdrsFailed - 9696 in HPIFPTRAP.MIB. 9697 Error PDC failed reading a specific value from its own copy of the RDRs Probable Cause: problem on cell wherein PDC could not properly access memory Recommended Action: Contact HP support to troubleshoot cell board Probable Cause: a non-existent/non-accessible register was specified by software. Recommended Action: Contact HP support for possible PDC upgrade SNMP Trap: hpevtBootReadPrefetchFailed - 9697 in HPIFPTRAP.MIB. 9698 Error PDC failed reading a specific value from its own copy of the RDRs Probable Cause: problem on cell wherein PDC could not properly access memory Recommended Action: Contact HP support to troubleshoot cell board SNMP Trap: hpevtBootReadZlcoFailed - 9698 in HPIFPTRAP.MIB. 9700 Error PDC failed attempting to update ZLCO and PREFETCH RDR settings Probable Cause: Could not update CPU settings Recommended Action: Contact HP support to troubleshoot cell board and CPU. SNMP Trap: hpevtBootUpdateZlcoAndPrefetchFailed - 9700 in HPIFPTRAP.MIB. 9701 Error PDC failed to read the HV Flag in the Partition Configuration Data Probable Cause: An error occurred which prevented the complex profiles from being distributed properly. Recommended Action: Create and distribute a new complex profile using ParMgr on a functional partition in the complex. Restore the last complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. Generate a genesis complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. SNMP Trap: hpevtBootErrorReadingZlcoFlagInPdProfile - 9701 in HPIFPTRAP.MIB. 9706 Warning Failed to get the configured set from the Complex Profiles A and C Probable Cause: A hardware problem exists with MP or PDHC hardware. Recommended Action: Contact HP Support to confirm the MP and PDHC are functioning properly. SNMP Trap: hpevtBootFindCoreCellCmplxProfileAcErr - 9706 in HPIFPTRAP.MIB. 9707 Warning No possible core cells were found in the configured set Probable Cause: most likely a configuration problem, Recommended Action: check to ensure a valid core cell is configured to be in the partition. SNMP Trap: hpevtBootFindCoreCellConfigSelectErr - 9707 in HPIFPTRAP.MIB. 9708 Warning Could not find a viable core cell in the partition Probable Cause: Configuration error, fabric failure; the intended core cell failed during boot. Recommended Action: check partition configuration, check for failed cells. SNMP Trap: hpevtBootCellLclCantFindViable - 9708 in HPIFPTRAP.MIB. 9709 Warning Could not find a viable core cell in the partition Probable Cause: Configuration error, Mainbackplane failure, The intended core cell failed during boot. Recommended Action: Check partition configuration, Check for failed cells, as indicated by high-alert level IPMI events earlier in the boot. SNMP Trap: hpevtBootCellRmtCantFindViable - 9709 in HPIFPTRAP.MIB. Platform Agent Events 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Event Description
Event Severity
Event ID
Firmware unable to relocate VGA BIOS Probable Cause: Most likely there is a
permanent memory error in the VGA BIOS region (physical address 0xc0000 - 0xdffff).
Recommended Action: Replace the DIMM causing the permanent memory error in
the VGA BIOS region. The PDT reports which DIMM is causing errors in the physical
address range 0xc0000 - 0xdffff. SNMP Trap: hpevtVgaBiosRelocFail - 9682 in
HPIFPTRAP.MIB.
Warning
9682
The Compatibility Matrix stored in NVRAM has a checksum error Probable Cause:
NVRAM has become corrupt. Restore from a backup. SNMP Trap:
hpevtCompMatrixXsumError - 9685 in HPIFPTRAP.MIB.
Error
9685
PDC failed its attempt to get default RDR values Probable Cause: Hardware problem
with the CPU. Recommended Action: Contact HP Support to confirm the CPU is
functioning properly. SNMP Trap: hpevtBootGetDefaultRdrsFailed - 9695 in
HPIFPTRAP.MIB.
Error
9695
PDC could not read current RDR values of the executing CPU Probable Cause:
Hardware problem with the CPU. Recommended Action: Contact HP Support to
confirm the CPU is functioning properly. SNMP Trap:
hpevtBootGetCurrentRdrsFailed - 9696 in HPIFPTRAP.MIB.
Error
9696
PDC failed reading a specific value from its own copy of the RDRs Probable Cause:
problem on cell wherein PDC could not properly access memory Recommended
Action: Contact HP support to troubleshoot cell board Probable Cause: a
non-existent/non-accessible register was specified by software. Recommended Action:
Contact HP support for possible PDC upgrade SNMP Trap:
hpevtBootReadPrefetchFailed - 9697 in HPIFPTRAP.MIB.
Error
9697
PDC failed reading a specific value from its own copy of the RDRs Probable Cause:
problem on cell wherein PDC could not properly access memory Recommended
Action: Contact HP support to troubleshoot cell board SNMP Trap:
hpevtBootReadZlcoFailed - 9698 in HPIFPTRAP.MIB.
Error
9698
PDC failed attempting to update ZLCO and PREFETCH RDR settings Probable
Cause: Could not update CPU settings Recommended Action: Contact HP support
to troubleshoot cell board and CPU. SNMP Trap:
hpevtBootUpdateZlcoAndPrefetchFailed - 9700 in HPIFPTRAP.MIB.
Error
9700
PDC failed to read the HV Flag in the Partition Configuration Data Probable Cause:
An error occurred which prevented the complex profiles from being distributed
properly. Recommended Action: Create and distribute a new complex profile using
ParMgr on a functional partition in the complex. Restore the last complex profile
using the 'CC' command from the MP, then use ParMgr to create a new complex
profile. Generate a genesis complex profile using the 'CC' command from the MP,
then use ParMgr to create a new complex profile. SNMP Trap:
hpevtBootErrorReadingZlcoFlagInPdProfile - 9701 in HPIFPTRAP.MIB.
Error
9701
Failed to get the configured set from the Complex Profiles A and C Probable Cause:
A hardware problem exists with MP or PDHC hardware. Recommended Action:
Contact HP Support to confirm the MP and PDHC are functioning properly. SNMP
Trap: hpevtBootFindCoreCellCmplxProfileAcErr - 9706 in HPIFPTRAP.MIB.
Warning
9706
No possible core cells were found in the configured set Probable Cause: most likely
a configuration problem, Recommended Action: check to ensure a valid core cell is
configured to be in the partition. SNMP Trap: hpevtBootFindCoreCellConfigSelectErr
- 9707 in HPIFPTRAP.MIB.
Warning
9707
Could not find a viable core cell in the partition Probable Cause: Configuration error,
fabric failure; the intended core cell failed during boot. Recommended Action: check
partition configuration, check for failed cells. SNMP Trap:
hpevtBootCellLclCantFindViable - 9708 in HPIFPTRAP.MIB.
Warning
9708
Could not find a viable core cell in the partition Probable Cause: Configuration error,
Mainbackplane failure, The intended core cell failed during boot. Recommended
Action: Check partition configuration, Check for failed cells, as indicated by high-alert
level IPMI events earlier in the boot. SNMP Trap: hpevtBootCellRmtCantFindViable
- 9709 in HPIFPTRAP.MIB.
Warning
9709
Platform Agent Events
67