HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 112
Hpipmi (IPMI Driver) Events, HpMcaLog (MCA Monitor Service) Events, Device\CpqHlth
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Event ID Event Severity Event Description 129 Error %1 Error processing notified %2 event. %3 %1 - "[component name]" %2 - "FPL" %3 - "See log file for details." 129 Error %1 Error processing notified %2 event. %3 %1 - "[component name]" %2 - "SEL" %3 - "See log file for details." Hpipmi (IPMI Driver) Events Event ID Event Severity Event Description 1000 Error During communication with the IPMI BMC device, the system detected that the BMC entered an error state. The driver attempted to set the BMC state to a working state but failed to do so. After 20 successive attempts, the driver has set the IPMI device to a non working state. It is recommended that you seek assistance from Hewlett-Packard. You can return the device instance to the working state by disabling and enabling the IPMI device instance labeled Hewlett-Packard IPMI Device. You can locate the IPMI device instance within the Device Manager user interface. 1001 Error A IPMI device was not recognized or detected, the IPMI device driver was not loaded. 1002 Warning The IPMI driver read a registry parameter that was invalid, the driver used a default value for the registry parameter HKLM\SYSTEM\CurrentControlSet\Control\IPMI\%2. 1003 Error The IPMI device driver attempted to communicate with the IPMI BMC device during device creation. However the communication failed due to a timeout. Either the configured timeouts are too small and the IPMI BMC device responses take longer than the timeouts or the BMC has a technical fault. You can increase the timeouts associated with the IPMI device driver. 1004 Error The IPMI device driver attempted to communicate with the IPMI BMC device during normal operation. However the communication failed due to a timeout. You can increase the timeouts associated with the IPMI device driver located in the registry at HKLM\SYSTEM\CurrentControlSet\Control\IPMI. 2000 Informational \Device\CpqHlth, The Hewlett Packard IPMI device driver was loaded. 2001 Error The Hewlett Packard IPMI device driver could not load. NTSTATUS return code is shown in data field. 2002 Warning The IPMI device driver could not open the IML soft log in the windows registry: %2. HpMcaLog (MCA Monitor Service) Events Event ID Event Severity Event Description 106 Error %1 Failed to initialize service: %2. %3 %1 - "[component name]" %2 - "Error code = error code" %3 - "See log file for details." 113 Error %1 Could not register with the Service Control Manager. %2 %1 - "[component name]" %2 - "See log file for details. 114 Error %1 Could not set the service status with the Service Control Manager. %2 %1 "[component name]" %2 - "See log file for details. 126 Error %1 WMI usage error. %2 %1 - "[component name]" %2 - "See log file for details. 112 Management Agents Event Tables