HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 18

Event ID Event Severity Event Description 5143 Warning I/O rope reset failed to complete Probable Cause: I/O CEC failure. Recommended Action: Reboot. If problem persists, contact your HP representative to check the I/O controller. SNMP Trap: hpevtIoRopeResetError - 5143 in HPIFPTRAP.MIB. 5144 Warning I/O SBA clear error failed Probable Cause: I/O chipset failure. Recommended Action: Contact your HP representative to check the I/O chipset. SNMP Trap: hpevtIoSbaClearErrFailed - 5144 in HPIFPTRAP.MIB. 5145 Warning PCI slot has incorrect default power state Probable Cause: The hot-plug controller has failed. Recommended Action: Contact your HP representative to check the hot-plug slot. SNMP Trap: hpevtIoSlotPowerDefaultError - 5145 in HPIFPTRAP.MIB. 5146 Warning PCI slot power on error Probable Cause: The I/O card is damaged or improperly inserted. Recommended Action: Replace or reseat the I/O card. SNMP Trap: hpevtIoSlotPowerOnError - 5146 in HPIFPTRAP.MIB. 5147 Warning PCI slot's standby power failed Probable Cause: I/O slot failure. Recommended Action: Reseat IO card. Replace IO card. If problem persists, contact your HP representative to check the I/O slot. SNMP Trap: hpevtIoSlotStandbyPowerError 5147 in HPIFPTRAP.MIB. 5148 Warning Found invalid PCIXCAP value Probable Cause: The I/O card is damaged or improperly inserted. Recommended Action: Replace or reseat the I/O card. SNMP Trap: hpevtIoUnknownPcixcapVal - 5148 in HPIFPTRAP.MIB. 5149 Warning Unsupported rope frequency Probable Cause: Internal firmware error. Recommended Action: Contact your HP representative to check the firmware. SNMP Trap: hpevtIoUnsupRopeFreq - 5149 in HPIFPTRAP.MIB. 5150 Warning Unsupported host bridge type Probable Cause: Firmware needs to be updated. An incorrect I/O backplane is installed. Recommended Action: Contact your HP representative to check the firmware and the I/O backplane. SNMP Trap: hpevtIoUnsupportedLba - 5150 in HPIFPTRAP.MIB. 5152 Error Machine Check initiated Probable Cause: A Machine Check has occurred. Recommended Action: Analyze cause of Machine Check using diag's and EFI tools. SNMP Trap: hpevtMcInitiated - 5152 in HPIFPTRAP.MIB. 5155 Error Error in temporary mdt area Probable Cause: The memory area where the MDT is supposed to be built has an error in it, so the MDT cannot be built there. Recommended Action: Reboot, if problem persists contact your HP representative for support. SNMP Trap: hpevtMdtConstructAreaBad - 5155 in HPIFPTRAP.MIB. 5156 Error Failed to find lmmio entry in mdt Probable Cause: The MDT table is bad because it did not have an LMMIO entry in it. Recommended Action: Reboot, if problem persists contact your HP representative for support. SNMP Trap: hpevtMdtLmmioEntryNotFound - 5156 in HPIFPTRAP.MIB. 5157 Error Memory page zero bad Probable Cause: Memory page 0 was slated for deallocation in the PDT. Recommended Action: FW is written such that this event should never be generated. If the user sees this event, please contact HP support. SNMP Trap: hpevtMdtPageZeroBad - 5157 in HPIFPTRAP.MIB. 5158 Error Failed to find space in mdt Probable Cause: FW requested an entry in the MDT, and there wasn't a large enough chunk of contiguous memory for the requested size. Recommended Action: Reboot, if problem persists contact your HP representative for support. SNMP Trap: hpevtMdtUnableToFindSpace - 5158 in HPIFPTRAP.MIB. 5159 Warning Media failure: info was not retrieved/logged Probable Cause: The Error handler has failed to retrieve or log data due to a media failure. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. SNMP Trap: hpevtMediaFailure - 5159 in HPIFPTRAP.MIB. 5160 Warning Bus interface register test failed Probable Cause: The CEC failed the register test. Recommended Action: Contact HP support to troubleshoot the problem. SNMP Trap: hpevtMemBibRegFailure - 5160 in HPIFPTRAP.MIB. 18 Management Agents Event Tables