HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 57

A read after write of a XBC CSR failed Probable Cause: Fabric Access Error, XBC Key

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Event ID Event Severity Event Description 8926 Warning Failed disabling the XIN link for a single cell model Probable Cause: Fabric Access Error. Recommended Action: Contact HP Support personnel to analyze the fabric. SNMP Trap: hpevtFabricInitCcLinkDisableErr - 8926 in HPIFPTRAP.MIB. 8930 Error Error while getting the XBC Semaphore Probable Cause: Most likely a hardware problem, but confirm the cause by looking at the return status. Recommended Action: Check XBC, Backplane, Flex Cables, Contact HP Support Personnel for further troubleshooting. SNMP Trap: hpevtFabricSetPortStateGetSm4Err - 8930 in HPIFPTRAP.MIB. 8931 Warning Error releasing the XBC Semaphore Probable Cause: Fabric Access problem. Either an error reading the hardware or XBC Key contention. Recommended Action: Look for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables, Contact HP Support Personnel. SNMP Trap: hpevtFabricSetPortStateRlsSm4Err 8931 in HPIFPTRAP.MIB. 8936 Warning Unexpected fabric firmware error Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. SNMP Trap: hpevtFabricAssertFabricErr - 8936 in HPIFPTRAP.MIB. 8939 Warning The CC's XIN link was found to be already initialized Probable Cause: Firmware problem. Contact HP Support Personnel. SNMP Trap: hpevtFabricXinLinkAlreadyInit - 8939 in HPIFPTRAP.MIB. 8940 Error Cell has been disabled by the PDHC because no CPU modules were found. Probable Cause: No CPU modules are installed. Recommended Action: Install CPU modules on the Cell. SNMP Trap: hpevtNoCpuModulesFoundByPdhc - 8940 in HPIFPTRAP.MIB. 8941 Error Cell has been disabled by PDHC FW because the CPU modules are not compatible. Probable Cause: At least one of the installed CPU modules are incompatible with at least one other CPU module. Recommended Action: Contact HP support personnel to troubleshoot the CPU modules on the Cell. SNMP Trap: hpevtCpuModCompatMismatch - 8941 in HPIFPTRAP.MIB. 8942 Error Cell has been disabled because of invalid data in a CPU module Scratch EEPROM. Probable Cause: The CPU module is not an HP CPU module, or the FRUID data for this CPU module has not been programmed. Recommended Action: Contact HP support personnel to troubleshoot the CPU module. SNMP Trap: hpevtBadCpuModScratchCksum - 8942 in HPIFPTRAP.MIB. 8954 Warning The Cell Battery voltage level low warning Probable Cause: The Cell Battery is low. Recommended Action: It needed to be replaced. SNMP Trap: hpevtPdhBatteryLowWarning - 8954 in HPIFPTRAP.MIB. 8959 Error Error while copying the XBC routing to the local port Probable Cause: Error accessing XBC CSRs. Recommended Action: Contact HP Support personnel to analyze the fabric. SNMP Trap: hpevtFabricRouteXbcCopyRoutingErr - 8959 in HPIFPTRAP.MIB. 8960 Error A read after write of a XBC CSR failed Probable Cause: Fabric Access Error, XBC Key Disabled. Check XBC, links, backplane, Contact HP Support Personnel for further troubleshooting. SNMP Trap: hpevtFabricCopyRdBackFailed - 8960 in HPIFPTRAP.MIB. 8962 Warning Couldn't release the Semaphore while writing routing states. Probable Cause: Fabric Access Error. Check XBC, Check links. SNMP Trap: hpevtFabricRtgCompleteSm4RlsErr - 8962 in HPIFPTRAP.MIB. 8964 Error Couldn't write the XBC's forward progress register Probable Cause: Fabric Access Error. Couldn't write this XBC. Recommended Action: Contact HP Support personnel to analyze the fabric. SNMP Trap: hpevtFabricRtgCompleteWrFwdPrgErr - 8964 in HPIFPTRAP.MIB. 8965 Error Couldn't access the XBC semaphore registers. Probable Cause: Fabric Access Error. Couldn't read or write this XBC. Recommended Action: Contact HP Support personnel to analyze the fabric. SNMP Trap: hpevtFabricRtgCompleteSm4AccessErr - 8965 in HPIFPTRAP.MIB. Platform Agent Events 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Event Description
Event Severity
Event ID
Failed disabling the XIN link for a single cell model Probable Cause: Fabric Access
Error. Recommended Action: Contact HP Support personnel to analyze the fabric.
SNMP Trap: hpevtFabricInitCcLinkDisableErr - 8926 in HPIFPTRAP.MIB.
Warning
8926
Error while getting the XBC Semaphore Probable Cause: Most likely a hardware
problem, but confirm the cause by looking at the return status. Recommended Action:
Check XBC, Backplane, Flex Cables, Contact HP Support Personnel for further
troubleshooting. SNMP Trap: hpevtFabricSetPortStateGetSm4Err - 8930 in
HPIFPTRAP.MIB.
Error
8930
Error releasing the XBC Semaphore Probable Cause: Fabric Access problem. Either
an error reading the hardware or XBC Key contention. Recommended Action: Look
for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables,
Contact HP Support Personnel. SNMP Trap: hpevtFabricSetPortStateRlsSm4Err -
8931 in HPIFPTRAP.MIB.
Warning
8931
Unexpected fabric firmware error Probable Cause: An unanticipated error occurred.
Contact HP Support personnel to analyze the IPMI FPL log. SNMP Trap:
hpevtFabricAssertFabricErr - 8936 in HPIFPTRAP.MIB.
Warning
8936
The CC's XIN link was found to be already initialized Probable Cause: Firmware
problem. Contact HP Support Personnel. SNMP Trap: hpevtFabricXinLinkAlreadyInit
- 8939 in HPIFPTRAP.MIB.
Warning
8939
Cell has been disabled by the PDHC because no CPU modules were found. Probable
Cause: No CPU modules are installed. Recommended Action: Install CPU modules
on the Cell. SNMP Trap: hpevtNoCpuModulesFoundByPdhc - 8940 in
HPIFPTRAP.MIB.
Error
8940
Cell has been disabled by PDHC FW because the CPU modules are not compatible.
Probable Cause: At least one of the installed CPU modules are incompatible with at
least one other CPU module. Recommended Action: Contact HP support personnel
to troubleshoot the CPU modules on the Cell. SNMP Trap:
hpevtCpuModCompatMismatch - 8941 in HPIFPTRAP.MIB.
Error
8941
Cell has been disabled because of invalid data in a CPU module Scratch EEPROM.
Probable Cause: The CPU module is not an HP CPU module, or the FRUID data for
this CPU module has not been programmed. Recommended Action: Contact HP
support personnel to troubleshoot the CPU module. SNMP Trap:
hpevtBadCpuModScratchCksum - 8942 in HPIFPTRAP.MIB.
Error
8942
The Cell Battery voltage level low warning Probable Cause: The Cell Battery is low.
Recommended Action: It needed to be replaced. SNMP Trap:
hpevtPdhBatteryLowWarning - 8954 in HPIFPTRAP.MIB.
Warning
8954
Error while copying the XBC routing to the local port Probable Cause: Error accessing
XBC CSRs. Recommended Action: Contact HP Support personnel to analyze the
fabric. SNMP Trap: hpevtFabricRouteXbcCopyRoutingErr - 8959 in HPIFPTRAP.MIB.
Error
8959
A read after write of a XBC CSR failed Probable Cause: Fabric Access Error, XBC Key
Disabled. Check XBC, links, backplane, Contact HP Support Personnel for further
troubleshooting. SNMP Trap: hpevtFabricCopyRdBackFailed - 8960 in
HPIFPTRAP.MIB.
Error
8960
Couldn't release the Semaphore while writing routing states. Probable Cause: Fabric
Access Error. Check XBC, Check links. SNMP Trap:
hpevtFabricRtgCompleteSm4RlsErr - 8962 in HPIFPTRAP.MIB.
Warning
8962
Couldn't write the XBC's forward progress register Probable Cause: Fabric Access
Error. Couldn't write this XBC. Recommended Action: Contact HP Support personnel
to analyze the fabric. SNMP Trap: hpevtFabricRtgCompleteWrFwdPrgErr - 8964 in
HPIFPTRAP.MIB.
Error
8964
Couldn't access the XBC semaphore registers. Probable Cause: Fabric Access Error.
Couldn't read or write this XBC. Recommended Action: Contact HP Support personnel
to analyze the fabric. SNMP Trap: hpevtFabricRtgCompleteSm4AccessErr - 8965 in
HPIFPTRAP.MIB.
Error
8965
Platform Agent Events
57