HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 30
MC: I/O error log/clear error Probable Cause: SFW's Machine Check Handler was
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Event ID Event Severity Event Description 5623 Warning DIMM thermal loading order warning Probable Cause: The current DIMM loading order does not follow the guidelines in the user manual Recommended Action: Rearrange the DIMMs to follow the loading order specified in the Maintenance and Operation Manual SNMP Trap: hpevtMemDimmThermalLoadOrderWarn - 5623 in HPIFPTRAP.MIB. 5626 Error The PD cannot boot, a majority of cells did not arrive at Rendezvous Probable Cause: PD Rendezvous Boot Rules: If greater than 50% of the assigned cells are rendezvoused, we will boot. If less than 50% of the assigned cells are rendezvoused, don't boot. If exactly 50% of the assigned cells are rendezvoused, including all of the preferred core cells, we will boot. If exactly 50% have rendezvoused, and there is a specified preferred core cell not rendezvoused, don't boot. If exactly 50% have rendezvoused, and there are no preferred core cells, don't boot. If any of the above apply in preventing the boot. Reconfigure the PD and reboot. SNMP Trap: hpevtCellMajorityNotPresent - 5626 in HPIFPTRAP.MIB. 5638 Warning INIT: Monarch failed in slave rendezvous Probable Cause: A processor has failed rendezvous. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. SNMP Trap: hpevtInitRendezvousSlavesFail 5638 in HPIFPTRAP.MIB. 5646 Warning MC: I/O error log/clear error Probable Cause: SFW's Machine Check Handler was unable to log or clear I/O error registers. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. SNMP Trap: hpevtMcIoClearFail - 5646 in HPIFPTRAP.MIB. 5655 Warning MC: MCA to BERR escalation not supported by PAL Probable Cause: Cannot escalate an MCA to BERR. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. SNMP Trap: hpevtMcPalCantEscalateToBerr - 5655 in HPIFPTRAP.MIB. 5656 Warning MC: MCA to BINIT escalation not supported by PAL Probable Cause: Cannot escalate an MCA to BINIT. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. SNMP Trap: hpevtMcPalCantEscalateToBinit - 5656 in HPIFPTRAP.MIB. 5657 Warning MC: Get PAL features failed Probable Cause: SFW failed to get the feature set from PAL Recommended Action: Update firmware to get newer PAL that support the PAL_GET_FEATUREs call. SNMP Trap: hpevtMcPalGetFeatFail - 5657 in HPIFPTRAP.MIB. 5658 Warning MC: Previous PAL rendezvous failed; rebooting Probable Cause: PAL Failed to rendezvous the processors during a MCA. Recommended Action: Review error logs to determine cause of MCA. If problem persists, contact HP support to troubleshoot the problem. SNMP Trap: hpevtMcPalRendFail - 5658 in HPIFPTRAP.MIB. 5659 Warning MC: Set PAL features failed Probable Cause: SFW failed to set the feature set from PAL. Recommended Action: update newer system firmware with the new PAL that support the PAL_SET_FEATURES call. SNMP Trap: hpevtMcPalSetFeatFail - 5659 in HPIFPTRAP.MIB. 5677 Warning MC: Monarch failed in slave rendezvous Probable Cause: A slave failed to rendezvous. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. SNMP Trap: hpevtMcRendezvousSlavesFail - 5677 in HPIFPTRAP.MIB. 5679 Warning MC_RENDEZVOUS: Rendezvous vector out of range Probable Cause: A bad rendezvous vector has been registered. Recommended Action: Reboot if necessary to re-register vector, if problem persists contact your HP representative for support. SNMP Trap: hpevtMcRendezBadVectRange - 5679 in HPIFPTRAP.MIB. 5682 Warning MC_RENDEZVOUS: No MC monarch Probable Cause: Software is making a SAL_MC_RENDEZVOUS call when it shouldn't. Recommended Action: Just a warning that software or OS is making a call when it shouldn't. SFW will ignore the call when this happen. Need to fix OS or software to not make the SAL_MC_RENDEZVOUS when there is no monarch processor chosen. SNMP Trap: hpevtMcRendezNoMonarch - 5682 in HPIFPTRAP.MIB. 30 Management Agents Event Tables