HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 77
In SetupNCTable, a write to the GLOBAL_LINK_SEL_NONCOH CSR failed. Data
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Event ID Event Severity Event Description 10414 Warning In SetupNCTable, a write to the GLOBAL_LINK_SEL_NONCOH CSR failed. Data field: (data written to CSR) | (actual CSR data read 32). Probable Cause: System firmware was unable to write a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtNctTblWrtGlobLnkSelNonCohFail - 10414 in HPIFPTRAP.MIB. 10415 Warning SetupNCTable failed in ArfPhase3. Data field: cell set passed in to SetupNCTable Probable Cause: System firmware was unable to write some fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtNctTblFailArfPhs3 - 10415 in HPIFPTRAP.MIB. 10427 Warning A failure occurred while prepping a back-to-back system for post-rendezvous Arches Fabric setup. Data field: return value from Phase4BackToBackPrep. Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtPostRndevzFailPrepBckToBckSys - 10427 in HPIFPTRAP.MIB. 10429 Warning ArfPhase4 was unable to set up the Non-Coherent link select to at least one cell in its alive/gsm sharing set. Data field: bitmap of unreachable cells. Probable Cause: System firmware was unable to find valid routes to each cell in a previously good partition. Possible cable/connection problems. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtArfPhs4UnablSetNonCohLnk - 10429 in HPIFPTRAP.MIB. 10431 Warning Unable to set the Non-Coherent route. Data field: (sourceCell 32) | (cell set passed in to SetupNCTable). Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtUnablSetNonCohRout - 10431 in HPIFPTRAP.MIB. 10432 Warning Unable to setup the Coherent route table for a cell in our partition. Data field: (sourceCell 32) | (cell set passed in to SetupCohTable). Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtUnableSetCohRoutCel - 10432 in HPIFPTRAP.MIB. 10435 Warning Error writing the XBC ROUTE_TABLE_ENABLE_MASK CSR. Data field: (route set to disable) | (xbcNum 32) | (xbc port 48). Probable Cause: System firmware was unable to write various fabric hardware registers. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtErrWrtXbcRoutTblEnblMskCsr - 10435 in HPIFPTRAP.MIB. 10436 Warning The Arches Fabric vertex module returned an unexpected error during Non-Coherent table setup. Data field: (return value) | (sourceCell 32) | (dest cell 48). Probable Cause: Internal firmware error or data corruption. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtVertxRetUnxpctErrNonCohTbl - 10436 in HPIFPTRAP.MIB. 10439 Warning A write to a Skyline Global LINK_SEL_COHx CSR failed. Data field: cell number of the Skyline that failed. Probable Cause: System firmware was unable to write a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtWrtSkyGlobLnkSelCohFail - 10439 in HPIFPTRAP.MIB. 10475 Warning Unable to write the XBC port scratch CSR with the routing state. Data field: (routing state) | (xbcNum 32) | (portNum 48). Probable Cause: System firmware was unable to write a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric SNMP Trap: hpevtUnablWrtXbcPrtCsr - 10475 in HPIFPTRAP.MIB. Platform Agent Events 77