HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 124
Drive Array Tape Drive Replace Cleaning Tape. The cleaning tape in the tape drive
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Event ID Event Severity Event Description 1204 Warning Drive Array Accelerator Status Change. The array accelerator board attached to the array controller in %4 has a new status of %2.%n(Accelerator status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled)%n [SNMP TRAP: 3038 in CPQIDA.MIB] 1205 Warning Drive Array Accelerator Bad Data. The array accelerator board attached to the array controller in %4 is reporting that it contains bad cached data.%n [SNMP TRAP: 3039 in CPQIDA.MIB] 1206 Warning Drive Array Accelerator Battery Failed. The array accelerator board attached to the array controller in %4 is reporting a battery failure.%n [SNMP TRAP: 3040 in CPQIDA.MIB] 1207 Warning Drive Array Tape Library Status Change. The tape library in %4, SCSI bus %5, SCSI target %6 has a new status of %7.%n(Library status values: 1=other, 2=ok, 3=degraded, 4=failed, 5=offline)%n [SNMP TRAP: 3041 in CPQIDA.MIB] 1208 Warning Drive Array Tape Library Door Status Change. The tape library in %4, SCSI bus %5, SCSI target %6 has a new door status of %7.%n(Library door status values: 1=other, 2=notSupported, 3=closed, 4=open)%n [SNMP TRAP: 3042 in CPQIDA.MIB] 1209 Warning Drive Array Tape Drive Status Change. The tape drive in %4, SCSI bus %5, SCSI target %6 has a new status of %7.%n(Tape drive status values: 1=other, 2=ok, 3=degraded, 4=failed, 5=offline, 6=missingWasOk, 7=missingWasOffline)%n [SNMP TRAP: 3043 in CPQIDA.MIB] 1210 Drive Array Tape Drive Cleaning Required. The tape drive in %4, SCSI bus %5, SCSI Warning target %6 requires cleaning.%n [SNMP TRAP: 3044 in CPQIDA.MIB] 1211 Warning Drive Array Tape Drive Replace Cleaning Tape. The cleaning tape in the tape drive in %4, SCSI bus %5, SCSI target %6 needs to be replaced.%n [SNMP TRAP: 3045 in CPQIDA.MIB] 1212 Warning Storage System Fan Status Change.%nThe %6 %7 storage system connected to SCSI bus %5 of the controller in %4 has a new status of %2.%n(Fan status values: 1=other, 2=ok, 3=failed, 4=notInstalled, 5=degraded)%n [SNMP TRAP: 8026 in CPQSTSYS.MIB] 1213 Warning Storage System Temperature Status Change.%nThe %6 %7 storage system connected to SCSI bus %5 of the controller in %4 has a new temperature status of %2.%n(Temperature status values: 1=other,2=ok,3=degraded,4=failed,5=notInstalled) %n [SNMP TRAP: 8027 in CPQSTSYS.MIB] 1214 Warning Storage System Fault Tolerant Power Supply Status Change.%nThe fault tolerant power supply in the %6 %7 storage system connected to SCSI bus %5 of the controller in %4 has a new status of %2.%n(Power supply status values: 1=other,2=ok,3=degraded, 4=failed,5=notInstalled)%n [SNMP TRAP: 8028 in CPQSTSYS.MIB] 1215 Warning Fibre Channel Controller Status Change. The Fibre Channel Controller in %4 has a new status of %5.%n(Host controller status values: 1=other, 2=ok, 3=failed, 4=shutdown, 5=connectionDegraded, 6=connectionFailed)%n [SNMP TRAP: 16028 in CPQFCA.MIB] 1216 Warning Drive Array Physical Drive Status Change. The physical drive in %4, %5 with serial number "%7", has a new status of %2. %n(Drive status values: 1=other, 2=ok, 3=failed, 4=predictiveFailure) %n [SNMP TRAP: 3046 in CPQIDA.MIB] 1217 Warning Drive Array Spare Drive Status Change. The spare drive in %4, %5 has a new status of %2.%n(Spare status values: 1=other, 2=invalid, 3=failed, 4=inactive, 5=building,6=active) %n [SNMP TRAP: 3047 in CPQIDA.MIB] 1218 Warning Storage System Fan Status Change.%nThe %6 %7 storage system connected to %5 of the controller in %4 has a new status of %2.%n(Fan status values: 1=other, 2=ok, 3=failed, 4=notInstalled, 5=degraded)%n [SNMP TRAP: 8029 in CPQSTSYS.MIB] 124 Management Agents Event Tables