HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 20

Error adding entry to PDT Probable Cause: NVM write error. Recommended Action

Page 20 highlights

Event ID Event Severity Event Description 5187 Warning Memory Error Information not cleared Probable Cause: Software Error or CEC error Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap: hpevtMemErrClearFail - 5187 in HPIFPTRAP.MIB. 5189 Warning Couldn't clear memory error logs Probable Cause: SFW Error or CEC error Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap: hpevtMemErrLogFailedToClear - 5189 in HPIFPTRAP.MIB. 5190 Warning Memory error clear failed Probable Cause: SFW error or CEC error Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap: hpevtMemErrorRegClearFailure - 5190 in HPIFPTRAP.MIB. 5191 Warning DIMM loading order error: DIMM deallocated Probable Cause: A required DIMM is not loaded in order to allow for proper operation of the DIMM specified in the physical location. Recommended Action: Refer to the user's manual for Memory loading instructions. SNMP Trap: hpevtMemExtFatalLoadOrdErr - 5191 in HPIFPTRAP.MIB. 5193 Warning Generic memory firmware error Probable Cause: Corrupt NVM or System firmware failure Recommended Action: Contact HP support to troubleshoot the problem. SNMP Trap: hpevtMemFirmwareProb - 5193 in HPIFPTRAP.MIB. 5199 Error Memory interleaving algorithm failed Probable Cause: Unspecified SNMP Trap: hpevtMemInterleaveCodeFailure - 5199 in HPIFPTRAP.MIB. 5202 Error Memory interleave generation failed Probable Cause: SFW is outdated. Recommended Action: Update SFW. SNMP Trap: hpevtMemMainMemFailed - 5202 in HPIFPTRAP.MIB. 5204 Warning Uncorrectable (multiple-bit) ECC error in DIMM Probable Cause: Multiple bit error in DIMM Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemMbeInRank - 5204 in HPIFPTRAP.MIB. 5205 Warning Memory register test failed Probable Cause: The register within the chipset went bad. Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap: hpevtMemMcRegFailure - 5205 in HPIFPTRAP.MIB. 5208 Error SPD found no memory DIMMs Probable Cause: No DIMMs were detected Recommended Action: Install DIMMs or Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtMemNoDimmsInstalled - 5208 in HPIFPTRAP.MIB. 5209 Error No memory found Probable Cause: FW found memory, but it could not find a correctly loaded rank. Recommended Action: Before this event is sent, FW will output which ranks it is deallocating and why. Review the preceding events and refer to the users manual to correct the memory loading. SNMP Trap: hpevtMemNoMemFound - 5209 in HPIFPTRAP.MIB. 5211 Error Cannot log memory error because PDT is disabled Probable Cause: FW found memory errors during selftest, but could not deallocate the page because the PDT is disabled. Recommended Action: Re-enable the PDT by clearing NVM SNMP Trap: hpevtMemPdtDisabledHalt - 5211 in HPIFPTRAP.MIB. 5212 Warning PDT is disabled Probable Cause: Informational event indicating that FW will not use the PDT this boot. Recommended Action: No action is needed if user does not want to use the PDT, otherwise, clear NVM SNMP Trap: hpevtMemPdtDisabledWarning - 5212 in HPIFPTRAP.MIB. 5214 Warning Error adding entry to PDT Probable Cause: NVM write error. Recommended Action: Contact HP support personnel to troubleshoot the problem. SNMP Trap: hpevtMemPdtNvmErr - 5214 in HPIFPTRAP.MIB. 5216 Error Cannot add PDT entry-PDT full Probable Cause: An attempt was made to add an entry to a full PDT. Recommended Action: Run the 'pdt' command from the EFI shell and remove/replace the DIMM that has the most PDT entries. If that doesn't work, contact HP support. SNMP Trap: hpevtMemPdtTableFull - 5216 in HPIFPTRAP.MIB. 20 Management Agents Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127

Event Description
Event Severity
Event ID
Memory Error Information not cleared Probable Cause: Software Error or CEC error
Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap:
hpevtMemErrClearFail - 5187 in HPIFPTRAP.MIB.
Warning
5187
Couldn't clear memory error logs Probable Cause: SFW Error or CEC error
Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap:
hpevtMemErrLogFailedToClear - 5189 in HPIFPTRAP.MIB.
Warning
5189
Memory error clear failed Probable Cause: SFW error or CEC error Recommended
Action: Contact HP support to troubleshoot the problem SNMP Trap:
hpevtMemErrorRegClearFailure - 5190 in HPIFPTRAP.MIB.
Warning
5190
DIMM loading order error: DIMM deallocated Probable Cause: A required DIMM
is not loaded in order to allow for proper operation of the DIMM specified in the
physical location. Recommended Action: Refer to the user's manual for Memory
loading instructions. SNMP Trap: hpevtMemExtFatalLoadOrdErr - 5191 in
HPIFPTRAP.MIB.
Warning
5191
Generic memory firmware error Probable Cause: Corrupt NVM or System firmware
failure Recommended Action: Contact HP support to troubleshoot the problem.
SNMP Trap: hpevtMemFirmwareProb - 5193 in HPIFPTRAP.MIB.
Warning
5193
Memory interleaving algorithm failed Probable Cause: Unspecified SNMP Trap:
hpevtMemInterleaveCodeFailure - 5199 in HPIFPTRAP.MIB.
Error
5199
Memory interleave generation failed Probable Cause: SFW is outdated. Recommended
Action: Update SFW. SNMP Trap: hpevtMemMainMemFailed - 5202 in
HPIFPTRAP.MIB.
Error
5202
Uncorrectable (multiple-bit) ECC error in DIMM Probable Cause: Multiple bit error
in DIMM Recommended Action: Contact HP Support personnel to troubleshoot the
problem SNMP Trap: hpevtMemMbeInRank - 5204 in HPIFPTRAP.MIB.
Warning
5204
Memory register test failed Probable Cause: The register within the chipset went bad.
Recommended Action: Contact HP support to troubleshoot the problem SNMP Trap:
hpevtMemMcRegFailure - 5205 in HPIFPTRAP.MIB.
Warning
5205
SPD found no memory DIMMs Probable Cause: No DIMMs were detected
Recommended Action: Install DIMMs or Contact HP Support personnel to
troubleshoot the problem SNMP Trap: hpevtMemNoDimmsInstalled - 5208 in
HPIFPTRAP.MIB.
Error
5208
No memory found Probable Cause: FW found memory, but it could not find a
correctly loaded rank. Recommended Action: Before this event is sent, FW will output
which ranks it is deallocating and why. Review the preceding events and refer to the
users manual to correct the memory loading. SNMP Trap: hpevtMemNoMemFound
- 5209 in HPIFPTRAP.MIB.
Error
5209
Cannot log memory error because PDT is disabled Probable Cause: FW found memory
errors during selftest, but could not deallocate the page because the PDT is disabled.
Recommended Action: Re-enable the PDT by clearing NVM SNMP Trap:
hpevtMemPdtDisabledHalt - 5211 in HPIFPTRAP.MIB.
Error
5211
PDT is disabled Probable Cause: Informational event indicating that FW will not use
the PDT this boot. Recommended Action: No action is needed if user does not want
to use the PDT, otherwise, clear NVM SNMP Trap: hpevtMemPdtDisabledWarning
- 5212 in HPIFPTRAP.MIB.
Warning
5212
Error adding entry to PDT Probable Cause: NVM write error. Recommended Action:
Contact HP support personnel to troubleshoot the problem. SNMP Trap:
hpevtMemPdtNvmErr - 5214 in HPIFPTRAP.MIB.
Warning
5214
Cannot add PDT entry-PDT full Probable Cause: An attempt was made to add an
entry to a full PDT. Recommended Action: Run the 'pdt' command from the EFI shell
and remove/replace the DIMM that has the most PDT entries. If that doesn't work,
contact HP support. SNMP Trap: hpevtMemPdtTableFull - 5216 in HPIFPTRAP.MIB.
Error
5216
20
Management Agents Event Tables