HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 66

In MFG with Memory SBE Seeding control Flag 26 Enabled. Should never be seen, warning Outputted in MFG

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Event ID Event Severity Event Description 9653 Warning Windows: Server Agents Management data not accessible, locked property Probable Cause: The installed management software has detected an unstable state of the underlying IPMI (Intelligent Platform Management Interface) subsystem and has disabled all management information from being shown by any manageability applications. The management information will become available automatically as soon as the IPMI subsystem has stabilized. Recommended Action: No action is required. SNMP Trap: hpevtWinAgtLockedProperty - 9653 in HPIFPTRAP.MIB. 9658 Error PCI slot exceeds power limit Probable Cause: The I/O configuration's power consumption exceeds the supported limit. Recommended Action: Remove the I/O card from each slot indicated by an IO_PCI_POWER_OVERLOAD_ERR event. SNMP Trap: hpevtIoPciPowerOverloadErr - 9658 in HPIFPTRAP.MIB. 9659 Warning (warning) Outputted in MFG, when Memory SBE Seeding is enabled Probable Cause: In MFG with Memory SBE Seeding control Flag (26) Enabled. Should never be seen at a customer's machine. SNMP Trap: hpevtMemSbeSeedingEnabled - 9659 in HPIFPTRAP.MIB. 9661 Error Failed to read the fabric topology information from the XBC Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to analyze the fabric. SNMP Trap: hpevtFabricWrFailedLinksTopoErr - 9661 in HPIFPTRAP.MIB. 9663 Error PDC failed to initialize PA specific fields of group C after finding IA bit set. Probable Cause: An error occurred which prevented the complex profiles from being distributed properly. Recommended Action: Create and distribute a new complex profile using ParMgr on a functional partition in the complex. Restore the last complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. Generate a genesis complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. SNMP Trap: hpevtBootErrInitGroupCPaFields - 9663 in HPIFPTRAP.MIB. 9666 Warning Unexpected fabric firmware error Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. SNMP Trap: hpevtFabricAssertFabricHop - 9666 in HPIFPTRAP.MIB. 9668 Error PDC could not read the copy of profile C stored in ICM Probable Cause: An error occurred which prevented the complex profiles from being distributed properly. Recommended Action: Create and distribute a new complex profile using ParMgr on a functional partition in the complex. Restore the last complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. Generate a genesis complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. SNMP Trap: hpevtBootFailedReadingProfileCInIcm - 9668 in HPIFPTRAP.MIB. 9670 Error Could not disable the XIN link before a fabricless boot Probable Cause: Fabric Access Error. Recommended Action: Contact HP Support personnel to check the CC, Check XBC SNMP Trap: hpevtFabricHaltLinkDisableErr - 9670 in HPIFPTRAP.MIB. 9674 Warning Fail to GetSiblingCpuCoreNum() in BootGetSpiromData() Probable Cause: Hardware problem with the CPU. Recommended Action: Contact HP Support to confirm the CPU is functioning properly. SNMP Trap: hpevtBootGetSpiromGetSiblingErr - 9674 in HPIFPTRAP.MIB. 9678 Error The clock ratio reported by manageability does not match the actual clock ratio Probable Cause: This is a hardware error and it is fatal SNMP Trap: hpevtCpuClockRatioMismatch - 9678 in HPIFPTRAP.MIB. 9681 Error Manual override of fatal stop boot condition Probable Cause: The user has initiated manual O/S boot despite the existence of a error. Recommended Action: Correct the error condition (see output of 'INFO WARNING' EFI shell command), reboot the system, and then initiate O/S boot. SNMP Trap: hpevtBootStopBootOverride - 9681 in HPIFPTRAP.MIB. 66 Management Agents Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Event Description
Event Severity
Event ID
Windows: Server Agents Management data not accessible, locked property Probable
Cause: The installed management software has detected an unstable state of the
underlying IPMI (Intelligent Platform Management Interface) subsystem and has
disabled all management information from being shown by any manageability
applications. The management information will become available automatically as
soon as the IPMI subsystem has stabilized. Recommended Action: No action is
required. SNMP Trap: hpevtWinAgtLockedProperty - 9653 in HPIFPTRAP.MIB.
Warning
9653
PCI slot exceeds power limit Probable Cause: The I/O configuration's power
consumption exceeds the supported limit. Recommended Action: Remove the I/O
card from each slot indicated by an IO_PCI_POWER_OVERLOAD_ERR event. SNMP
Trap: hpevtIoPciPowerOverloadErr - 9658 in HPIFPTRAP.MIB.
Error
9658
(warning) Outputted in MFG, when Memory SBE Seeding is enabled Probable Cause:
In MFG with Memory SBE Seeding control Flag (26) Enabled. Should never be seen
at a customer's machine. SNMP Trap: hpevtMemSbeSeedingEnabled - 9659 in
HPIFPTRAP.MIB.
Warning
9659
Failed to read the fabric topology information from the XBC Probable Cause: Fabric
Access Failure. Recommended Action: Contact HP Support personnel to analyze the
fabric. SNMP Trap: hpevtFabricWrFailedLinksTopoErr - 9661 in HPIFPTRAP.MIB.
Error
9661
PDC failed to initialize PA specific fields of group C after finding IA bit set. Probable
Cause: An error occurred which prevented the complex profiles from being distributed
properly. Recommended Action: Create and distribute a new complex profile using
ParMgr on a functional partition in the complex. Restore the last complex profile
using the 'CC' command from the MP, then use ParMgr to create a new complex
profile. Generate a genesis complex profile using the 'CC' command from the MP,
then use ParMgr to create a new complex profile. SNMP Trap:
hpevtBootErrInitGroupCPaFields - 9663 in HPIFPTRAP.MIB.
Error
9663
Unexpected fabric firmware error Probable Cause: An unanticipated error occurred.
Contact HP Support personnel to analyze the IPMI FPL log. SNMP Trap:
hpevtFabricAssertFabricHop - 9666 in HPIFPTRAP.MIB.
Warning
9666
PDC could not read the copy of profile C stored in ICM Probable Cause: An error
occurred which prevented the complex profiles from being distributed properly.
Recommended Action: Create and distribute a new complex profile using ParMgr
on a functional partition in the complex. Restore the last complex profile using the
'CC' command from the MP, then use ParMgr to create a new complex profile.
Generate a genesis complex profile using the 'CC' command from the MP, then use
ParMgr to create a new complex profile. SNMP Trap:
hpevtBootFailedReadingProfileCInIcm - 9668 in HPIFPTRAP.MIB.
Error
9668
Could not disable the XIN link before a fabricless boot Probable Cause: Fabric Access
Error. Recommended Action: Contact HP Support personnel to check the CC, Check
XBC SNMP Trap: hpevtFabricHaltLinkDisableErr - 9670 in HPIFPTRAP.MIB.
Error
9670
Fail to GetSiblingCpuCoreNum() in BootGetSpiromData() Probable Cause: Hardware
problem with the CPU. Recommended Action: Contact HP Support to confirm the
CPU is functioning properly. SNMP Trap: hpevtBootGetSpiromGetSiblingErr - 9674
in HPIFPTRAP.MIB.
Warning
9674
The clock ratio reported by manageability does not match the actual clock ratio
Probable Cause: This is a hardware error and it is fatal SNMP Trap:
hpevtCpuClockRatioMismatch - 9678 in HPIFPTRAP.MIB.
Error
9678
Manual override of fatal stop boot condition Probable Cause: The user has initiated
manual O/S boot despite the existence of a error. Recommended Action: Correct the
error condition (see output of 'INFO WARNING' EFI shell command), reboot the
system, and then initiate O/S boot. SNMP Trap: hpevtBootStopBootOverride - 9681
in HPIFPTRAP.MIB.
Error
9681
66
Management Agents Event Tables