HP Mv2120 HP MV2120, MV5020, MV5140, MV5150 Media Vault - User's Guide - Page 137

The USB device is listed under USB Disks. Additionally, any folders on the USB device are automatically shared and available for media streaming. To remove a USB drive from total storage 1 At the computer, click Start, All Programs, HP Media Vault, and then Control Center. 2 On the Tools tab, click Customize HP Media Vault. You are prompted for an administrator name and password if you set one up. For additional information, see Editing System Settings on page 2-26. 3 On the Disks tab, locate the USB device you want to remove. 4 Click Remove. The drive is removed from the list of drives on the Disk Setting page. Disconnect the USB device from the server. Formatting an External USB Device The HP Media Vault can interact with USB devices formatted as FAT32, NTFS, or ext3. The HP Media Vault can read and write files to FAT32 and ext3. The Media Vault can only read files from NTFS devices. It cannot write to them. You may also want to consider that ext3 disks can store larger files, over 74.7 GB. To format a USB device Note: Formatting disk drives erases all the disk's contents, including boot records, partition tables, and all shared folders and their sub-folders and files. Format disks only when you know that it is safe to proceed. 1 At the computer, click Start, All Programs, HP Media Vault, and then Control Center. 2 On the Tools tab, click Customize HP Media Vault. You are prompted for an administrator name and password if you set one up. For additional information, see Editing System Settings on page 2-26. 3 On the Disks tab, locate the USB disk you want to format. 4 Click Format. 10-