HP P3410A HP NetRAID 1M/2M Installation & Configuration - Page 148

Chapter 14 Troubleshooting Insufficient Memory Problem: There is insufficient memory on the adapter for the current configuration. Suggested solution: Check the adapter to be sure that the memory is properly installed. Following SCSI ID's are not Responding Channel-x:a.b.c Problem: On the channel listed (x), the physical drives with the SCSI IDs listed (a, b, c, and so on) are not responding. Suggested solution: Verify that the physical drives are connected and powered on. Other BIOS Error Messages Warning: Battery voltage Low Problem: The voltage of the battery backing the cache memory is low. Suggested solution: Fast charge the battery. This occurs automatically when the system is on. Battery life Low Problem: The battery backing the cache memory is approaching its predicted end of life. Suggested solution: Call an HP Service Representative to replace the battery backup module. Battery temperature out of range Problem: The temperature of the battery backing the cache memory is too low or too high. Suggested solution: • If the battery is too cold, allow it to warm up first. The battery will not fast charge if it is too cold. • If the battery is too hot, check the system for overheating or fan failure. The battery will not fast charge if it is too hot. 140