HP P3410A HP NetRAID 1M/2M Installation & Configuration - Page 77
launch HP Netserver Navigator. It looks different from HP Netserver
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 6 HP NetRAID Software 2. Insert the HP Netserver Navigator CD-ROM into the drive. HP Netserver Navigator should start automatically if automatic startup is enabled for the CD-ROM drive. If not, double-click launch32.exe on the CD-ROM to launch HP Netserver Navigator. It looks different from HP Netserver Navigator running on the HP Netserver. 3. On the Netserver Navigator screen's drop-down menu of HP Netservers, click the HP Netserver you are configuring. Then click the arrow in the lower right corner of the screen. 4. On the Netserver Navigator menu of NOSs, click the NOS you plan to install. Then click the arrow in the lower right corner of the screen. 5. The Netserver Navigator Main Menu is displayed. Click Guide to Configure Server. 6. The Guide to Configure Server list the following items: ◊ NOS Installation Instructions ◊ Tested Configurations ◊ Diskette Library Click NOS Installation Instructions. Then click the appropriate icon either to save the instructions to diskette, or to print the instructions. Follow the onscreen instructions. When you have finished saving or printing, click the Close arrow. 7. On the Guide to Configure Server screen, click Diskette Library. 8. On the Diskette Library screen, double-click the NOS drivers for the NOS you plan to install. Then follow the onscreen instructions to create the diskette. 9. Go to "Make NOS-specific Configuration Utility Diskette" later in Step I. Using the HP Netserver to Create Drivers Diskette and Instructions To use the HP Netserver you are configuring to create the diskette(s) containing the drivers for your NOS and the instructions for installing the NOS, do the following: 1. Turn on the HP Netserver and monitor, if they are not already on, and insert the HP Netserver Navigator CD-ROM into the drive. Turn off the HP Netserver power, wait 10 seconds, and turn it back on again. 2. From the HP Navigator Main Menu, choose Configure the Server. 69