HP P3410A HP NetRAID 1M/2M Installation & Configuration - Page 47
Installation and Configuration
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5 Installation and Configuration Overview This chapter covers Steps C, D, E, F, G, and H of the installation procedure. You should already have completed Step A, "Plan Your Hardware," and Step B, "Plan Arrays and Logical Drives" in Chapter 4, "Planning." Step C. Prepare the Adapter In this step, you install the adapter into the HP Netserver. Step C covers: • Plugging in the Battery Backup Unit on the HP NetRAID-2M adapter CAUTION The adapter is sensitive to static electricity and can easily be damaged by improper handling. Using a grounding strap is recommended. Read the following information carefully before you handle the accessory: • Leave the adapter in the antistatic bag until you are ready to install it. • If possible, use an antistatic wrist strap and grounding mat. • Before you remove the adapter from the bag, touch a grounded, unpainted metal surface on the system to discharge static electricity. 39