HP P3410A HP NetRAID 1M/2M Installation & Configuration - Page 70
Print Configuration, Con Any Other Adapters, Initialize Logical Drives
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 5 Installation and Configuration Print Configuration To print a copy of the configuration: 1. Choose Print from the Configuration menu. 2. Keep a copy of configuration Worksheets A and B together with the printed copy of your configuration file. They help you understand your configuration, replace a failed adapter, or communicate with HP Customer Support. Configure Any Other Adapters To configure another adapter from the HP NetRAID Assistant window: 1. Click the Adapter pull-down list and select the adapter. 2. Clear its configuration by choosing Clear Configuration from the Configuration menu. Click OK to the warning prompts. 3. Check the Rebuild Rate by choosing Rebuild Rate from the Adapter menu and reset the rate if necessary. 4. If global hot spares will be assigned, drag the desired Ready physical drives into the global hot spare pool. 5. Launch the HP NetRAID Assistant Wizard by choosing Wizard from the Configuration menu. 6. Configure the adapter as described in Step G. 7. Save the configuration and print it, as described in Step H. Initialize Logical Drives If you have not done so already, you must initialize your logical drives. CAUTION Initializing a logical drive destroys all data currently on the disk modules. To initialize the logical drives you defined for the adapter in the HP NetRAID Assistant Wizard: 1. If you have more than one adapter, click the Adapter pull-down list and select the adapter. 2. Select the logical drives to be initialized. 62