HP P3410A HP NetRAID 1M/2M Installation & Configuration - Page 76
Check Latest Versions, Create Drivers Diskette and Instructions
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 6 HP NetRAID Software Check Latest Versions To ensure that you have the latest versions of the software, obtain the current Status Report for your HP Netserver Navigator CD-ROM. This report describes any software updates since the CD-ROM was created, and indicates whether you need any updates and how to obtain them. Each version of the CD-ROM has a four-digit Document Number printed on the disk. Obtain the Status Report for your CD-ROM in one of these ways: • Internet: Access URL http://netserver.hp.com/netserver/. Click on the line that corresponds to your document number. • Internet FTP: Address: ftp://ftp.hp.com/pub/servers Create Drivers Diskette and Instructions NOTE If you plan to use the automatic mode of NOS installation to install NetWare or Windows NT, you do not need to make diskettes of the HP NetRAID drivers. However, you should copy the instructions for installing the NOS. To do so, refer to the instructions below to either print a copy directly, or copy the instructions to diskette to print later. You can use the HP Netserver Navigator CD-ROM to create the diskette(s) containing the drivers for your NOS and the instructions for installing them in either of two ways: • On a separate PC workstation running Windows 95, 98, NT, or 2000 and having a CD-ROM drive and mouse: Refer to "Using a Separate Workstation to Create Drivers Diskette and Instructions" later in this chapter. • On the HP Netserver you are configuring: Refer to "Using the HP Netserver to Create Drivers Diskette and Instructions" later in this chapter. Using a Separate Workstation to Create Drivers Diskette and Instructions To use a separate PC workstation to create the diskette(s) containing the drivers for your NOS and the instructions for installing the NOS, do the following: 1. Turn on the workstation and monitor, if they are not already on, and log on if necessary. 68