HP P3410A HP NetRAID 1M/2M Installation & Configuration - Page 50
Step D. Install the Adapter
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 5 Installation and Configuration Step D. Install the Adapter In this step, you will: • Turn off the HP Netserver and remove the necessary covers or open the panels • Install the adapter Turn Off the HP Netserver and Open It CAUTION HP NetRAID-1M and 2M Accessory boards are not hot pluggable. Unplug HP Netserver power cord(s) before installing a HP NetRAID-1M or 2M board. NOTE Before you begin, you may need to look up information about your HP Netserver in Information Assistant on the HP Netserver Online Documentation CD-ROM. You will need to know how to open or remove the HP Netserver panels and covers, as well as any special instructions for installing a board in a PCI slot of the HP Netserver. Turn off the HP Netserver and open it, as follows: 1. Bring down the operating system properly, as described in your NOS documentation. 2. Turn off the HP Netserver power and disconnect the power cord(s) and all telephone cords. 42