HP Photosmart 3200 User Guide - Page 115
Solution, HP Image Zone, Paper has jammed the HP All-in-One
View all HP Photosmart 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Troubleshooting Chapter 13 Do not load curled or wrinkled paper, or paper with bent or torn edges, into the input tray. For more information, see Avoid paper jams. Paper has jammed the HP All-in-One Solution If paper becomes jammed in your device, follow these instructions to clear the paper jam. 1. Press in the tab on the rear clean-out door to remove the door. Caution Clearing a paper jam from the top of the HP All-in-One can damage the print mechanism. Whenever possible, access and clear paper jams through the rear clean-out door. 2. Gently pull the paper out of the rollers. Caution If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the device. If you do not remove all the pieces of paper from the HP All-in-One, more paper jams are likely to occur. 3. Replace the rear clean-out door. Gently push the door forward until it snaps into place. 4. Press OK to continue the current job. Note If the paper is still jammed, see the onscreen Troubleshooting Help that came with your HP Image Zone software. Paper has jammed the optional two-sided printing accessory Solution You might need to remove the two-sided printing accessory. For more information, see the printed guide that came with your two-sided printing accessory. Note If you turned the HP All-in-One off before clearing the paper jam, turn it back on, and then restart your printing or copying job. 112 HP Photosmart 3200 All-in-One series