HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 122
Replace the front bezel and access panel.
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
9. Push in the latch holding the drive cage upright (1) and lower the drive cage all the way down (2). Figure 7-32 Lowering the Drive Cage 10. Connect the appropriate drive cables: a. If installing a diskette drive (available on some models only), connect the power and data cables to the rear of the drive and connect the other end of the data cable to the connector on the system board. b. If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board. 11. Replace the front bezel and access panel. 12. Reconnect the power cord and turn on the computer. 13. Lock any security devices that were disengaged when the access panel was removed. 112 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis