HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 127
Plastic Wire/Cable Fastener and Clips, Remove the access panel
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Plastic Wire/Cable Fastener and Clips Three different plastic wire fasteners (illustrated below) secure many of the system wires. You have to loosen these fasteners to gain access to the wires for several computer components. See the following illustration for proper routing of wires. NOTE: HP Pro 3015 shown. System board appearance varies by model. To loosen the fasteners: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 84). 2. Remove the access panel (Access Panel on page 85). 3. Rotate the drive cage to its upright position. 4. To open the round fastener (1), twist the two ends of the fastener until the ends come apart. Plastic Wire/Cable Fastener and Clips 117
Plastic Wire/Cable Fastener and Clips
Three different plastic wire fasteners (illustrated below) secure many of the system wires. You have to
loosen these fasteners to gain access to the wires for several computer components. See the
following illustration for proper routing of wires.
NOTE:
HP Pro 3015 shown. System board appearance varies by model.
To loosen the fasteners:
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
84
).
2.
Remove the access panel (
Access Panel
on page
85
).
3.
Rotate the drive cage to its upright position.
4.
To open the round fastener
(1)
, twist the two ends of the fastener until the ends come apart.
Plastic Wire/Cable Fastener and Clips
117