HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 79
System Fan, HP Pro 3010 shown.
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
System Fan 1. Prepare the computer for disassembly (Preparation for Disassembly on page 35). 2. Remove the access panel (Access Panel on page 36). 3. Lay the computer on its side with the rear facing toward you. 4. Disconnect the cable from the red/brown system board connector labeled CHASSIS_FAN1. 5. Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan forward, and then remove the fan from the chassis. NOTE: HP Pro 3010 shown. To install the fan, reverse the removal procedures. System Fan 69
System Fan
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
35
).
2.
Remove the access panel (
Access Panel
on page
36
).
3.
Lay the computer on its side with the rear facing toward you.
4.
Disconnect the cable from the red/brown system board connector labeled CHASSIS_FAN1.
5.
Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan
forward, and then remove the fan from the chassis.
NOTE:
HP Pro 3010 shown.
To install the fan, reverse the removal procedures.
System Fan
69