HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 76
Securing the Hard Drive Cage,
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. Attach the two screws that secure the hard disk drive cage to the chassis. Figure 6-32 Securing the Hard Drive Cage 6. If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector. If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the next available (unpopulated) SATA connector on the system board. NOTE: If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue SATA on the system board to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the next available (unpopulated) SATA connector on the system board. 7. Replace the computer access panel. 8. Reconnect the power cord and any external devices, then turn on the computer. 9. Lock any security devices that were disengaged when the access panel was removed. 66 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis