HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 126
CAUTION, Connecting the Hard Drive Cables
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
5. Push in the latch holding the drive cage upright and lower the drive cage all the way down. Figure 7-38 Lowering the Drive Cage 6. Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 7-39 Connecting the Hard Drive Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 7. Replace the access panel and front bezel. 8. Reconnect the power cord and any external devices, then turn on the computer. 9. Lock any security devices that were disengaged when the access panel was removed. NOTE: If you are replacing the primary hard drive, use the Recovery Disc Set to restore the operating system, software drivers, and any software applications that were preinstalled on the computer. 116 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis