HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 27
Computer Setup—Boot, Computer Setup-Advanced continued
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Table 3-3 Computer Setup-Advanced (continued) Option Description Onboard Serial Port 1 Allows you to select a setting for the onboard serial port: ● Disabled ● 3F8/IRQ4 ● 2F8/IRQ3 ● 3E8/IRQ4 ● 2E8/IRQ3 PCI Device SERR# Disables/enables SERR#. Computer Setup-Boot NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3-4 Computer Setup-Boot Option Description F9 Boot Menu F10 Setup Prompt F11 Recovery F12 Boot from LAN Prompt Disables/enables F9 Boot Menu. Disables/enables the F10 Setup prompt message on the logo screen. Disables/enables F11 Recovery and provides the option of showing the F11 Recovery prompt message on the logo screen. Choose from the following: ● Disabled ● Enabled no prompt ● Enabled and prompt Disables/enables the F12 Boot from LAN prompt message on the logo screen. Hard Disk Boot Seq. Optical Drive Boot Seq. Network Boot Seq. Allows you to specify the order of attached hard drive devices (such as USB HDD storage or USB flash media). The first drive in the order has priority in the boot sequence and is recognized as drive C (if any devices are attached). Allows you to specify the order in which attached optical drives (including USB ODD) are checked for a bootable operating system image. Allows you to specify the order in which network devices (including UP NIC cards) are checked for a bootable operating system image. First Boot Device Second Boot Device Third Boot Device Fourth Boot Device Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the four: ● Removable ● CDROM ● Hard Disk ● Network NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started. HP Pro 3000/3080 - Computer Setup (F10) Utility 17