HP Pro 3080 Maintenance & Service Guide: HP Pro 3000/3010/3080 Business PC - Page 188
Specifications - HP Pro 3015 Microtower continued, Appendix D, Specifications
View all HP Pro 3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Table D-1 Specifications - HP Pro 3015 Microtower (continued) Heat Dissipation For 115V/60Mhz For 115V/60Mhz Maximum 250W PFC HV ATX: 250W PFC HV ATX: 170.8W or 582.77 BTU/ 170.0W or 580.04 hr BTU/hr 300W PFC HV ATX: 300W PFC HV ATX: 173.3W or 591.3 BTU/hr 300W NPFC ATX: 174.9W or 596.76 BTU/ hr 300W 85% EFF ATX: 157.8W or 538.41 BTU/ hr 250W PFC HV TFX: 173.9W or 593.35 BTU/ hr 250W PFC TFX: 179.2W or 611.43 BTU/ hr 169.2W or 577.31 BTU/hr 300W NPFC ATX: 175.0W or 596.42 BTU/hr300W 85% EFF ATX: 153.4W or 523.4 BTU/ hr 250W PFC HV TFX: 172.3W or 587.89 BTU/hr 250W PFC TFX: 174.8W or 596.42 BTU/hr Typical (idle) For 115V/60Mhz For 115V/60Mhz 250W PFC HV TFX: 250W PFC HV TFX: 173.9W or 593.35 BTU/ 173.9W or 593.35 hr BTU/hr 250W PFC TFX: 250W PFC TFX: 179.2W or 611.43 BTU/ 179.2W or 611.43 hr BTU/hr Power Supply 115V 230V Operating Voltage Range 90-132 VAC 180-264 VAC Rated Voltage Range 100-127 VAC 200-240 VAC Rated Line Frequency 50-60 Hz 50-60 Hz Power Output 300 W 300 W Rated Input Current (maximum)1 8A @ 100 VAC 4A @ 200 VAC 1 This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch. 178 Appendix D Specifications