HP ProBook 4525s HP Notebook Reference Guide - Windows 7 - Page 87
Using the HP Universal Print Driver (select models only - factory reset
View all HP ProBook 4525s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Select Intel ME Firmware Local Update LAN Controller Intel ME Features Control Intel ME Power Control To do this Disable/enable local management of firmware updates. Disable/enable the integrated network controller. Disable/enable AMT or none. Configure the management engine power policies. iAMT Configuration Select Host Name TCP/IP Provision Model Setup and Configuration Un-Provision SOL/IDE-R Password Policy Secure Firmware Update Set PRTC Idle Timeout To do this Assign a host name to the computer. Disable/enable network interface or DHCP (assigns an IP address if DHCP has been disabled) or change the domain name. Assign Enterprise or Small Business iAMT model. Set options to control remote configuration of AMT. Reset the AMT configuration to factory defaults. Disable/enable remote boot control to IDE diskette or CD-ROM and assign a user name and password. Set options to control requirements for the network password and the MEBx password. Disable/enable or disable updating firmware remotely. Set the real-time clock. Set a time-out value. Change Intel ME Password Select Change ME Password To do this Change the password. NOTE: The default password is admin. Using the HP Universal Print Driver (select models only) The HP Universal Print Driver Series for Windows is a single intelligent driver that replaces individual drivers for HP networked printers. NOTE: The HP Universal Print Driver is preinstalled on select computer models only. To download the HP Universal Print Driver or obtain more information about using it, see the HP Web site at http://www.hp.com/go/universalprintdriver (English only). Using the HP Universal Print Driver (select models only) 77