HP ProLiant DL288 HP ProLiant DL288 G6 Server Software Configuration Guide - Page 13
CPU Bridge Configuration submenu, Table 5, Field, Description, Options
View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CPU Bridge Configuration submenu Figure 4 CPU Bridge Configuration submenu ROM-based Setup Utility CPU Bridge Chipset Configuration submenu CPU Revision A0 Current QPI Frequency Current Memory Frequency Current Memory Mode 5.866GT 1333 Mhz Sparing To transfer the QPI Links to full-speed or leave them in slow-mode QPI Links Speed QPI Frequency QPI L0s and L1 [Full-Speed] [Auto] [Enabled] Memory Frequency [Auto] Memory Speed with 20PC [[email protected]] ←→ Select Screen Advanced Memory Protection [Independent] ↑↓ Select Item Note Interleaving [Disabled] + - Change Option Memory Interleaving [Full Interleaving] F1 General Help QPI Optimization [Balanced] F10 Save and Exit Demand Scrubbing [Enabled] ESC Exit Patrol Scrubbing [Disabled] V02. 61(C) Copyright 1985-2006, American Megatrends, Inc. Table 5 CPU Bridge Configuration submenu fields Field CPU Revision Current QPI Frequency Current Memory Frequency Current Memory Mode QPI Links Speed QPI Frequency Description Display the CPU revision. Display the current QPI frequency. Options Display the current memory frequency. Display the current memory mode. Transit the QPI links to full-speed. Transit the QPI links to slow mode QuickPath Interconnect (QPI) is the connection between the CPUs and I/O hub. Transit the links to the auto speed when transitioning the links to full-speed. Full-Speed Slow Mode Auto System BIOS configuration 13