HP StorageWorks 2/16V HP StorageWorks Fabric OS 4.4.0F Release Notes (AA-RW89A - Page 42
Fabric OS 4.4.0d closed issues summary, Fixed
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Table 8 Fabric OS 4.4.0d closed issues summary Closed defect Status Issue: During firmware upgrade from FOS4.0.2x to FOS 4.4.0x, zone configuration is lost if switch is rebooted without any prior zone changes Fixed Symptom: During the upgrade from internal FOS v4.0.2 to v4.4.0x, there is a loss of zoning configuration. Even though cfgshow is empty, it will not merge after portdisable/enable. When workaround by using configdownload with a saved configuration file created prior to FOS 4.4.0, configdownload fails with vcEncoded mode not supported on FOS4.4.0x. Issue: The RPA and RPRT is not forwarded to FOS5.0 and later versions Fixed Symptom: When local domain HBA/port information changes, the information is not propagated to domains running FOS5.0 or higher. Issue: Cannot create DCC_POLICY by using * to include port numbers greater than 127 in the DCC_POLICY. Fixed Symptom: secpolicycreate "DCC_POLICY", "domainid(*)" on a platform with more than 128 port, fails with VERIFY - Failed expression: strlen(mbrBuf) > 0 Issue: ConnUnitPortFCid MIB changed format in FOS 4.4.0x Fixed Symptom: Output from early FOS was in byte data format. This was changed to asci data for FOS4.4.0x which caused applications relying on the old format to break. 42 Closed issues from Fabric OS 4.4.0d