HP StorageWorks 2/16V HP StorageWorks Fabric OS 4.4.0F Release Notes (AA-RW89A - Page 47

Closed issues from Fabric OS 4.4.0f Table 10 lists issues resolved with the release of Fabric OS version 4.4.0f. Table 10 Fabric OS 4.4.0f closed issues summary Closed defect Status Issue: When "Long Distance Fabric" parameter is configured on 1 Gb StorageWorks 8 and 16 switches to include a SAN Switch 4/32 in the fabric, ISL ports on the older switches get link timeouts. Workaround: Do not use Long Distance Fabric parameter. Use portcfglongdistance to set Long distance link on individual port. 1 Gb StorageWorks 8 and 16 switches running FOS 2.x must set the Long Distance Fabric parameter ON when connected to a SAN Switch 4/32. This results in a Continuous Link Timeout. Issue: DCC policy is not enforced properly after failover/reboot/fastboot. Symptom: DCC_POLICY is not enforced if only 1 CP is rebooted or fastbooted during either cold or warm recovery. Rebooting or fastbooting both CPs does not show any error. Workaround: Issue a subsequent secpolicyactivate after the reboot/fastboot completes to reestablish the DCC policy. Issue: When a disk drive on a loop is replaced, the Nameserver still shows the WWN of the old drive. Symptom: During JBOD drive replacement testing, the new drive WWN information is not listed in the switch name server table. The portloginshow command displays the correct WWN of the drive, but the old wwn shows up in the name server table. Workaround: After swapping the device, portdisable and portenable will correct the portwwn in the NS database. Issue: Switch does not pass traffic in interopmode with Window host if there is a zone change performed without a switch reboot. Workaround: Switch reboot. Symptom: FC trace showed FOS 4.4 switch rejecting a GPN_ID with the error port ID not in register. Fabric OS 4.4.0f release notes 47