HP StorageWorks MSA 2/8 HP StorageWorks MSA SAN Switch 2/8 Installation Guide - Page 46

Switch Readiness LED Definitions, Port Speed LED Definitions, Table 4

Get HP StorageWorks MSA 2/8 - SAN Switch PDF manuals and user guides View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Managing the MSA SAN Switch 2/8 Switch Readiness LED Definitions Table 4: Switch Readiness LED Definitions LED Color No light Hardware Status Switch has no power. Steady green Steady yellow Slow flashing yellow (on 1 second; off 1 second) Switch is on and all ports are ready for use. One or more ports are offline OR Switch is booting and has not logged into the MSA1000. Error log contains one or more port diagnostic error messages. Recommended Action Verify switch is installed correctly. No action required. Verify the switch has completed booting and is not disabled. If light is still yellow, check the error log and the Port Status LEDs. Check error log, port status LEDs, port media, and cables or loopback plugs. Port Speed LED Definitions Table 5: Port Speed LED Definitions LED Color No light Steady green Hardware Status Port is transmitting at 1 Gb/s Port is transmitting at 2 Gb/s Recommended Action No action required. No action required. 46 MSA SAN Switch 2/8 Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Managing the MSA SAN Switch 2/8
46
MSA SAN Switch 2/8 Installation Guide
Switch Readiness LED Definitions
Port Speed LED Definitions
Table 4:
Switch Readiness LED Definitions
LED Color
Hardware Status
Recommended Action
No light
Switch has no power.
Verify switch is installed
correctly.
Steady green
Switch is on and all ports
are ready for use.
No action required.
Steady yellow
One or more ports are
offline
OR
Switch is booting and has
not logged into the
MSA1000.
Verify the switch has
completed booting and is
not disabled. If light is still
yellow, check the error log
and the Port Status LEDs.
Slow flashing yellow
(on 1 second;
off 1 second)
Error log contains one or
more port diagnostic
error messages.
Check error log, port
status LEDs, port media,
and cables or loopback
plugs.
Table 5:
Port Speed LED Definitions
LED Color
Hardware Status
Recommended Action
No light
Port is transmitting at
1 Gb/s
No action required.
Steady green
Port is transmitting at
2 Gb/s
No action required.