HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 65

Troubleshooting Identifying LCD-Indicated Conditions Table 3-1. Chassis Codes for J5000 and J7000 Workstations Ostat Code TST 7020 FRU SYS BD Message search for IMM TST 703s DIMM DIMM s IMM vrfy FLT 704s DIMM DIMM s IMM fail TST 705s DIMM DIMM s IMM test INI 706s DIMM DIMM s is IMM INI 70F0 DIMM DIMM scan done TST 7100 SYS BD mem register tst WRN 7101 SYS BD skip mem reg tst FLT 7102 SYS BD mem addr reg tst FLT 7103 SYS BD mem mbat reg tst FLT 7104 SYS BD mem reg tst fail FLT 7105 SYS BD mem err reg test FLT 7106 SYS BD mem err clr fail INI 7200 DIMM strt DIMM detect INI 7201 DIMM DIMM detect x% WRN 7202 SYS BD skip DIMM detect FLT 7203 DIMM unsupp DIMM type FLT 7204 DIMM SPD fatal error INI 7205 DIMM add HP DIMM type INI 7206 DIMM non-HP DIMM type Description Try to find a single memory bank to use for the initial memory module. DIMM s was the initial memory module last boot. Verify it still works. DIMM s failed the initial memory module test. Test DIMM in slot s as the initial memory module. DIMM s chosen as initial memory module. Memory DIMM scan complete. Start testing registers in memory controller. Bypass the memory controller register test. Firmware detected an error in the memory controller address registers. Firmware detected an error in the memory controller bank registers. Firmware detected an error in the memory controller memory registers. Firmware detected an error in the memory controller error registers. Firmware was unable to clear the error registers after testing. Start the Serial Presence Detection (SPD) to search for memory DIMMs. SPD is x% finished. Bypass Serial Presence Detection. SPD found an unsupported DIMM type. SPD detected an unexpected, fatal error. New HP manufactured DIMM type added to tables. New non-HP DIMM type added to tables (use at own risk). Chapter 3 61