Home » HP Manuals » Desktops » HP Visualize J5000 » Manual Viewer

HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 78

micro controller

Get HP Visualize J5000 - Workstation PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Troubleshooting Identifying LCD-Indicated Conditions Table 3-1. Chassis Codes for J5000 and J7000 Workstations Ostat INI Code CC0n FRU SYS BD INI CC1n SYS BD INI CC2n SYS BD INI CC3n SYS BD INI CC4n SYS BD TST D000 SYS BD WRN D004 SYS BD INI D005 SYS BD INI D006 SYS BD WRN D007 SYS BD FLT D01n SYS/IO WRN D02n SYS/IO Message CPUn OS rendezvs CPUn early rend CPUn rendezvous CPUn cache rend CPUn mem rendez micro controller micro not resp set dom1 fan spd set dom2 fan spd bad microctl cmd fan n: failure! fan n: too slow! Description Slave CPU n entering the final rendezvous, waiting for the operating system to awaken it. Slave CPU n entering the early rendezvous, waiting for the monarch CPU to initialize scratch RAM and other system state. Slave CPU n entering rendezvous. Slave CPUs enter this rendezvous numerous times during boot. Slave CPU n entering cached rendezvous, waiting for the monarch CPU to configure the system bus. Slave CPU n entering memory rendezvous, waiting for the monarch CPU to select a boot device. Firmware is initializing communications with the system controller. Firmware detected a communications error with the system controller. Firmware is initializing communications with the system controller. Firmware is initializing communications with the system controller. Firmware detected a communications error with the system controller. Firmware detected system fan n stopped. Firmware detected system fan n is running too slowly. 74 Chapter 3

Section	Page
Service Handbook	1
Service Handbook	1
Service Handbook	1
HP Visualize J5000/J7000 Workstations	1
Edition 1	1
HP Part No. A4978-90039	1
Printed in USA April 1999	1
Edition E0499	1
Notice	2
Notice	2
The information contained in this document is subject to change without notice.	2
Hewlett-Packard Warranty Statement	2
Hewlett-Packard Warranty Statement	2
HP PRODUCTDURATION OF WARRANTY ...	2
1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...	2
1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...	2
1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...	2
2. HP warrants that HP software will not fail to execute its programming instructions, for the pe...	2
2. HP warrants that HP software will not fail to execute its programming instructions, for the pe...	2
3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If ...	2
3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If ...	2
4. HP products may contain remanufactured parts equivalent to new in performance or may have been...	2
4. HP products may contain remanufactured parts equivalent to new in performance or may have been...	2
5. The warranty period begins on the date of delivery or on the date of installation if installed...	2
5. The warranty period begins on the date of delivery or on the date of installation if installed...	2
6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or ca...	2
6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or ca...	2
7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY O...	2
7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY O...	2
8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 o...	2
8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 o...	2
9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOL...	3
9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOL...	3
Restricted Rights Legend	3
Restricted Rights Legend	3
Use, duplication, or disclosure by government is subject to restrictions as set forth in subdivis...	3
© Copyright 1999	3
© Copyright 1999	3
Hewlett-Packard Company. All Rights Reserved. This document contains proprietary information that...	3
© Copyright 1980, 1984	3
© Copyright 1980, 1984	3
AT&T, Inc.	3
© Copyright 1979, 1980, 1983	3
© Copyright 1979, 1980, 1983	3
The Regents of the University of California. This software and documentation is based in part on ...	3
Printing History	4
Printing History	4
New editions of this manual incorporate all material updated since the previous edition. Update p...	4
The manual part number and printing date indicate its current edition. The manual part number cha...	4
Table of Contents	5
Table of Figures	11
Ch 1 Product Information	15
1 Product Information	15
This chapter provides general product information about the HP Visualize J5000 and J7000 workstat...	15
This chapter provides general product information about the HP Visualize J5000 and J7000 workstat...	15
Chapter Overview	16
Chapter Overview	16
This chapter contains the following main sections:	16
J5000/J7000 workstation:product description	16
J5000/J7000 workstation:product description	16
J5000/J7000 workstation:product description	16
The HP Visualize J5000 and J7000 workstations are high-performance systems capable of handling th...	16
J5000/J7000 workstation:differences between J5000 and J7000	16
J5000/J7000 workstation:differences between J5000 and J7000	16
J5000/J7000 workstation:physical dimensions	16
J5000/J7000 workstation:physical dimensions	16
J5000/J7000 workstation:physical dimensions	16
Physical dimensions of workstation	16
Dimensions of workstation	16
Size of workstation, physical	16
Both workstations use a common chassis, which is 17.5 inches (44.5 cm) high ¥ 13.6 inches (34.5 c...	16
NOTE For a list of the environmental and electrical requirements for each workstation, see the sp...	16
NOTE For a list of the environmental and electrical requirements for each workstation, see the sp...	16
Features of J5000/J7000 workstation	17
Features of J5000/J7000 workstation	17
Features of J5000/J7000 workstation	17
J5000/J7000 workstation:features	17
The J5000 and J7000 workstations have the following key features.	17
Microprocessors	17
Microprocessors	17
Microprocessors	17
CPUs	17
HP-UX: versions supported	17
HP-UX: versions supported	17
J5000/J7000 workstation:operating system versions	17
Operating system, HP-UX:versions supported	17
J5000/J7000 workstation:user interface	17
J5000/J7000 workstation:user interface	17
User interface	17
HP CDE graphical user interface	17
Graphical user interface	17
J5000/J7000 workstation:compatibility with other workstations	17
J5000/J7000 workstation:compatibility with other workstations	17
Compatibility with other workstations	17
J5000/J7000 workstation:memory slots	17
J5000/J7000 workstation:memory slots	17
Memory:description of	17
J5000/J7000 workstation:power supply	17
J5000/J7000 workstation:power supply	17
Power supply:description of	17
J5000/J7000 workstation:internal storage devices	17
J5000/J7000 workstation:internal storage devices	17
Internal storage devices:description of	17
Networking:description of	17
Networking:description of	17
J5000/J7000 workstation:networking	17
Connectors on rear panel:list of	17
Connectors on rear panel:list of	17
I/O ports on rear panel:list of	17
Ports on rear panel:list of	17
J5000/J7000 workstation:ports	17
J5000/J7000 workstation:I/O slots	18
J5000/J7000 workstation:I/O slots	18
I/O slots:description of	18
J5000/J7000 workstation:graphics cards supported	18
J5000/J7000 workstation:graphics cards supported	18
Graphics cards:list of supported	18
Cards, I/O: graphics cards supported	18
• Monitors Supported:	18
• Standard Keyboard and Mouse: USB (Universal Serial Bus) Series A	18
J5000/J7000 workstation:front panel components	18
J5000/J7000 workstation:front panel components	18
J5000/J7000 workstation:front panel components	18
Components:front panel	18
Front panel:components	18
This section describes the components that are located on the front panel of the J5000 and J7000 ...	18
Figure 1-1 shows the front panel components with the bezel attached.	18
Figure11. Components on the Front Panel with the Bezel Attached	18
Figure11. Components on the Front Panel with the Bezel Attached	18
<GRAPHIC>	19
Lifting ledge	19
Lifting ledge	19
J5000/J7000 workstation:lifting ledge	19
As noted in Figure 1-1, the hard disk drives are located behind the right-hand door of the front ...	19
Figure12. Front Panel with the Bezel Door Open	19
Figure12. Front Panel with the Bezel Door Open	19
<GRAPHIC>	19
J5000/J7000 workstation:bezel on front panel	19
Bezel lock, front panel	19
Bezel, front panel	19
Front panel:bezel	19
J5000/J7000 workstation:front panel bezel	19
Figure 1-3 on the next page shows the front panel of the workstation with the bezel removed. This...	19
In addition, Figure 1-3 shows the location of the two bezel-detach screw holes on the right-hand ...	19
Figure13. Components on the Front Panel with the Bezel Removed	20
Figure13. Components on the Front Panel with the Bezel Removed	20
<GRAPHIC>	20
• Power switch	20
• Power switch	20
• System LCD	20
• Internal storage devices:	20
J5000/J7000 workstation:power switch	20
J5000/J7000 workstation:power switch	20
J5000/J7000 workstation:power switch	20
Power switch:description of	20
Buttons:power	20
J5000/J7000 workstation:powering off	20
Powering off the J5000/J7000	20
The power switch is located on the left side of the front panel as part of the power switch/LCD a...	20
NOTE The J5000 and J7000 workstations have a “soft power down” feature that shuts the operating s...	20
NOTE The J5000 and J7000 workstations have a “soft power down” feature that shuts the operating s...	20
CAUTION Do	20
CAUTION Do	20
J5000/J7000 workstation:LCD	21
J5000/J7000 workstation:LCD	21
J5000/J7000 workstation:LCD	21
LCD:description of	21
The Liquid Crystal Display (LCD) indicator is located on the left side of the front panel as part...	21
The following symbols appear in the LCD, representing different system activities.	21
LCD:symbols	21
LCD:symbols	21
LCD:symbols	21
<GRAPHIC>	21
J5000/J7000 workstation:internal storage devices	21
J5000/J7000 workstation:internal storage devices	21
Internal storage devices:description of	21
The J5000 and J7000 workstations support the following internal storage devices, which are also l...	21
• Up to four hot-pluggable, SCA (Single Connector Attach) hard disk drives	21
• Up to four hot-pluggable, SCA (Single Connector Attach) hard disk drives	21
• Optionally, one 32X CD drive	21
• Optionally, either one DDS-3 tape drive, or one 3.5-inch floppy disk drive	21
The following subsections describe these internal storage devices.	21
J5000/J7000 workstation:hard disk drives	21
J5000/J7000 workstation:hard disk drives	21
J5000/J7000 workstation:hard disk drives	21
Internal storage devices:hard disk drives	21
Storage devices:hard disk drives	21
Drives:hard disk	21
Hard disk drives:description of	21
The J5000 and J7000 workstations can support up to four hot-pluggable, SCA (Single Connector Atta...	21
Hard disk drives:models supported	21
Hard disk drives:models supported	21
• 9 GB LVD 10K RPM disk drive (Product Number A4997A)	21
• 9 GB LVD 10K RPM disk drive (Product Number A4997A)	21
• 9 GB LVD 10K RPM disk drive (Product Number A4997A)	21
• 18 GB LVD 10K RPM disk drive (Product Number A4998A)	21
Hot-plugging hard disk drives	21
Hot-plugging hard disk drives	21
Hot-plugging hard disk drives	21
Hard disk drives:hot-plugging	21
Internal storage devices:CD drive	22
Internal storage devices:CD drive	22
Internal storage devices:CD drive	22
J5000/J7000 workstation:CD drive	22
Storage devices:CD drive	22
Drives:CD	22
CD drive:description of	22
As an optional component, the J5000 and J7000 workstations support one 32X CD drive with an ATAPI...	22
Figure 1-5 shows the operating features of the CD drive, and Table 1-2 describes these features.	22
Figure15. CD Drive Features	22
Figure15. CD Drive Features	22
<GRAPHIC>	22
Table12. CD Drive Features	22
<TABLE HEADING>	22
<TABLE ROW>	22
Feature	22
Purpose	22
Purpose	22
<TABLE BODY>	22
<TABLE ROW>	22
Busy Indicator	22
Busy Indicator	22
Lights during a data access operation and blinks during a data transfer. The indicator blinks ini...	22
Lights during a data access operation and blinks during a data transfer. The indicator blinks ini...	22
<TABLE ROW>	22
Emergency Eject Hole	22
Emergency Eject Hole	22
Opens the Disk Tray when the end of a paper clip is inserted into it. Used when the workstation d...	22
<TABLE ROW>	22
Eject Button	22
Opens the Disk Tray so that a CD disk may be inserted in it or removed from it. When the drive is...	22
Opens the Disk Tray so that a CD disk may be inserted in it or removed from it. When the drive is...	22
<TABLE ROW>	22
Disk Tray	22
Holds the CD disk. (Note that this style of CD drive does not use a disk caddy.)	22
Holds the CD disk. (Note that this style of CD drive does not use a disk caddy.)	22
J5000/J7000 workstation:DDS-3 tape drive	23
J5000/J7000 workstation:DDS-3 tape drive	23
J5000/J7000 workstation:DDS-3 tape drive	23
Internal storage devices:DDS-3 tape drive	23
Storage devices:DDS-3 tape drive	23
Drives:DDS-3 tape	23
DDS-3 tape drive:description of	23
The J5000 and J7000 workstations support either one DDS-3 tape drive or one 3.5-inch floppy disk ...	23
The optional DDS-3 tape drive (Product Number A5011A) is a 3.5-inch, half-height form factor devi...	23
Figure 1-6 shows the operating features of the DDS-3 tape drive.	23
Figure16. DDS-3 Tape Drive Features	23
Figure16. DDS-3 Tape Drive Features	23
<GRAPHIC>	23
DDS-3 tape drive:LED codes	23
DDS-3 tape drive:LED codes	23
DDS-3 tape drive:LED codes	23
LED codes for DDS-3 tape drive	23
<GRAPHIC>	24
J5000/J7000 workstation:floppy disk drive	24
J5000/J7000 workstation:floppy disk drive	24
Internal storage devices:floppy disk drive	24
Storage devices:floppy disk drive	24
Drives:floppy disk	24
Floppy disk drive:description of	24
The J5000 and J7000 workstations support either one DDS-3 tape drive or one 3.5-inch floppy disk ...	24
The optional floppy disk drive (Product Number A5009A) is a 3.5-inch form factor device with a PC...	24
Figure 1-8 shows the operating features of the floppy disk drive, and Table 1-3 describes these f...	24
Figure18. Floppy Disk Drive Features	24
Figure18. Floppy Disk Drive Features	24
<GRAPHIC>	24
Table13. Floppy Disk Drive Features	24
<TABLE HEADING>	24
<TABLE ROW>	24
Feature	24
Purpose	24
Purpose	24
<TABLE BODY>	24
<TABLE ROW>	24
Activity LED	24
Activity LED	24
Flashes to indicate the floppy disk drive is in use.	24
Flashes to indicate the floppy disk drive is in use.	24
<TABLE ROW>	24
Eject Button	24
Push to eject a floppy disk from the drive.	24
Push to eject a floppy disk from the drive.	24
J5000/J7000 workstation:rear panel components	25
J5000/J7000 workstation:rear panel components	25
J5000/J7000 workstation:rear panel components	25
Components:rear panel	25
Rear panel components	25
This section describes the various components located on the rear panel of the J5000 and J7000 wo...	25
NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened.	25
NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened.	25
Figure19. Components on the Rear Panel	25
Figure19. Components on the Rear Panel	25
<GRAPHIC>	25
J5000/J7000 workstation:thumbscrews on rear panel	26
J5000/J7000 workstation:thumbscrews on rear panel	26
J5000/J7000 workstation:thumbscrews on rear panel	26
Rear panel components:thumbscrews	26
Thumbscrews on rear panel	26
There are two T-15 thumbscrews in the upper corners of the rear panel. Loosening these two screws...	26
Safety interlock thumbscrew	26
Safety interlock thumbscrew	26
Power supply:interlock thumbscrew	26
Interlock thumbscrew	26
CAUTION Do	26
CAUTION Do	26
J5000/J7000 workstation:connectors on rear panel	26
J5000/J7000 workstation:connectors on rear panel	26
J5000/J7000 workstation:connectors on rear panel	26
This subsection describes the following connectors that are located on the rear panel. Note that ...	26
• RS-232C Serial connectors	26
• RS-232C Serial connectors	26
• LAN 10/100 BaseT RJ45 connector	26
• USB connectors (for keyboard and mouse only)	26
• Parallel connector	26
• SCSI connectors	26
• Audio connectors	26
• Power cord connector	26
Rear panel components:RS-232C serial connectors	26
Rear panel components:RS-232C serial connectors	26
Rear panel components:RS-232C serial connectors	26
RS-232C serial:connectors	26
Serial:connectors	26
Connectors on rear panel:RS-232C serial	26
Ports on rear panel:RS-232C serial	26
I/O ports on rear panel:RS-232C serial	26
There are a variety of pointing devices (such as a mouse or trackball) or peripheral devices (inc...	26
The SIO ports are programmable, allowing functions such as bit rate, character length, parity, an...	26
Table 1-4 shows the SIO connector pin listings. The serial connectors are 9-pin D-sub connectors....	26
<TABLE>	27
Table14. Serial I/O Pins	27
Serial:I/O pins	27
RS-232C serial:I/O pins	27
<TABLE HEADING>	27
<TABLE ROW>	27
Pin No.	27
Pin No.	27
Signal	27
Description	27
<TABLE BODY>	27
<TABLE ROW>	27
1	27
DCD	27
Data Carrier Detect	27
<TABLE ROW>	27
2	27
RXD	27
Receive Data	27
<TABLE ROW>	27
3	27
TXD	27
Transmit Data	27
<TABLE ROW>	27
4	27
DTR	27
Data Terminal Ready	27
<TABLE ROW>	27
5	27
GND	27
Ground	27
<TABLE ROW>	27
6	27
DSR	27
Data Set Ready	27
<TABLE ROW>	27
7	27
RTS	27
Request To Send	27
<TABLE ROW>	27
8	27
CTS	27
Clear To Send	27
<TABLE ROW>	27
9	27
RI	27
Ring Indicator	27
Connectors on rear panel:LAN	27
Connectors on rear panel:LAN	27
Connectors on rear panel:LAN	27
Rear panel components:LAN connector	27
LAN connector	27
Networking:connector	27
RJ45 LAN connector	27
Ports on rear panel:LAN	27
I/O ports on rear panel:LAN	27
Networking:description of	27
The J5000 and J7000 workstations have one built-in, Ethernet IEEE 802.3, RJ45 Twisted Pair connec...	27
Rear panel components:USB connectors	27
Rear panel components:USB connectors	27
Rear panel components:USB connectors	27
USB:connectors	27
Connectors on rear panel:USB	27
Ports on rear panel:USB	27
I/O ports on rear panel:USB	27
The two USB (Universal Serial Bus) Series A connectors on the rear panel of the J5000 and J7000 w...	27
See the “Keyboard and Mouse” section on	27
Connectors on rear panel:parallel	27
Connectors on rear panel:parallel	27
Connectors on rear panel:parallel	27
Rear panel components:parallel connector	27
Parallel connector	27
Ports on rear panel:parallel	27
I/O ports on rear panel:parallel	27
The 25-pin HP Parallel I/O interface uses Centronics interface protocols to support peripheral de...	27
Rear panel components:SCSI connectors	28
Rear panel components:SCSI connectors	28
Rear panel components:SCSI connectors	28
SCSI:connectors	28
Connectors on rear panel:SCSI	28
Ports on rear panel:SCSI	28
I/O ports on rear panel:SCSI	28
There are two SCSI connectors on the rear panel: one	28
Consult the documentation that accompanies each SCSI device for specific information concerning i...	28
SCSI:mixing NSE and LVD devices on same bus	28
SCSI:mixing NSE and LVD devices on same bus	28
SCSI:mixing NSE and LVD devices on same bus	28
SCSI:terminators	28
SCSI:terminators	28
SCSI:terminators	28
Terminators, SCSI	28
Connectors on rear panel:audio	28
Connectors on rear panel:audio	28
Connectors on rear panel:audio	28
Rear panel components:audio connectors	28
Audio:connectors	28
Ports on rear panel:audio	28
I/O ports on rear panel:audio	28
The J5000 and J7000 workstations have audio-input and -output capabilities through external input...	28
Figure110. Audio Connectors	28
Figure110. Audio Connectors	28
<GRAPHIC>	28
<TABLE>	29
<TABLE>	29
Table15. Audio Electrical Specifications	29
Audio:electrical specifications	29
Specifications:audio electrical	29
<TABLE BODY>	29
<TABLE ROW>	29
Frequency Response	29
Frequency Response	29
25 Hz to 20 kHz	29
<TABLE ROW>	29
Input Sensitivity/Impedance: – Line in – Microphone	29
2.0 Vpk/47 Kohm 22 mVpk/1 Kohm	29
2.0 Vpk/47 Kohm 22 mVpk/1 Kohm	29
<TABLE ROW>	29
Maximum Output Level/Impedance: – Line out – Headphones – Speaker (internal)	29
2.8 Vpp/47 Kohm 2.75 Vpp/50 ohm 5.88 Vpp/48 ohm	29
<TABLE ROW>	29
Output Impedance: – Line out – Headphones	29
619 ohm 118 ohm	29
Rear panel components:power cord connector	29
Rear panel components:power cord connector	29
Rear panel components:power cord connector	29
Power cord connector	29
Connectors on rear panel:power cord	29
Plug the power cord into the power cord connector to provide AC power to the workstation. The pow...	29
J5000 workstation:power cord connector	29
J5000 workstation:power cord connector	29
J7000 workstation:power cord connector	29
Figure111. Power Cord Connectors	29
Figure111. Power Cord Connectors	29
<GRAPHIC>	30
Miscellaneous Components on the Rear Panel	30
This subsection describes the following, miscellaneous components that are also located on the re...	30
• Security tab	30
• Security tab	30
• TOC button	30
• I/O slots	30
J5000/J7000 workstation:security tab	30
J5000/J7000 workstation:security tab	30
J5000/J7000 workstation:security tab	30
Rear panel components:security tab	30
Security tab	30
The security tab, which is located at the top of the rear panel, can be used to lock the workstat...	30
TOC button	30
TOC button	30
TOC button	30
J5000/J7000 workstation:TOC button	30
Rear panel components:TOC button	30
Buttons:TOC	30
The TOC (Transfer Of Control) button interrupts the system.	30
I/O slots:description of	30
I/O slots:description of	30
I/O slots:description of	30
PCI I/O slots	30
J5000/J7000 workstation:I/O slots	30
Rear panel components:I/O slots	30
The I/O slots located on the rear panel are 64-bit PCI (Peripheral Connect Interface) slots, prov...	30
1. Power only – Top slot	30
1. Power only – Top slot	30
1. Power only – Top slot	30
2. PCI-2X (5V, 33 MHz)	30
3. PCI-2X (5V, 33 MHz)	30
4. PCI-4X (3.3V, 66 MHz)	30
5. PCI-2X (5V, 33 MHz)	30
6. PCI-2X (5V, 33 MHz)	30
7. PCI-4X (3.3V, 66 MHz)	30
8. PCI-2X (5V, 33 MHz) – Bottom slot	30
NOTE Slot 1 is reserved for power only and should	30
NOTE Slot 1 is reserved for power only and should	30

Match case Limit results 1 per page

Chapter 3

Troubleshooting

Identifying LCD-Indicated Conditions

INI

CC0

SYS BD

CPU

OS rendezvs

Slave CPU

entering the final

rendezvous, waiting for the operating

system to awaken it.

INI

CC1

SYS BD

CPU

early rend

Slave CPU

entering the early

rendezvous, waiting for the monarch CPU

to initialize scratch RAM and other

system state.

INI

CC2

SYS BD

CPU

rendezvous

Slave CPU

entering rendezvous. Slave

CPUs enter this rendezvous numerous

times during boot.

INI

CC3

SYS BD

CPU

cache rend

Slave CPU

entering cached rendezvous,

waiting for the monarch CPU to configure

the system bus.

INI

CC4

SYS BD

CPU

mem rendez

Slave CPU

entering memory

rendezvous, waiting for the monarch CPU

to select a boot device.

TST

D000

SYS BD

micro controller

Firmware is initializing communications

with the system controller.

WRN

D004

SYS BD

micro not resp

Firmware detected a communications

error with the system controller.

INI

D005

SYS BD

set dom1 fan spd

Firmware is initializing communications

with the system controller.

INI

D006

SYS BD

set dom2 fan spd

Firmware is initializing communications

with the system controller.

WRN

D007

SYS BD

bad microctl cmd

Firmware detected a communications

error with the system controller.

FLT

D01

SYS/IO

fan

: failure!

Firmware detected system fan

stopped.

WRN

D02

SYS/IO

fan

: too slow!

Firmware detected system fan

running too slowly.

Table 3-1. Chassis Codes for J5000 and J7000 Workstations

Ostat

Code

FRU

Message

Description