Honeywell HNVE1 Reference Guide - Page 35
Updating IP Network Settings Automatically,
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
HNVE1 V2.1 1-Channel Encoder Reference Guide Option Device Name IP Address Subnet Mask Default Gateway MAC Address Table 3-4 IP Network Device Setting Options Description By default, the device name is the device type plus the MAC Address. It is recommended that you change the device name. The IP address of the device on the network. The subnet mask, or netmask, value of the device on the network. IP networks can be divided into several smaller networks by subnetting. When a network is subnetted, you must specify a subnet mask, which tells network devices which smaller network they belong to. Note If the subnet mask is not properly configured, the camera or dome may not be able to communicate with other devices on the network. The default gateway address that connects the device to the network. Enter the IP address of the host to use as a gateway between networks. The gateway allows communication between devices that are on different networks. Without a correct gateway setting, the camera or dome cannot receive or transmit data from or to devices that are not in the same network address range. The MAC address is a factory-assigned address that is unique for each device. Figure 3-3 IP Network Settings Set Automatically or Manually Clear this check box and manually set the network details Updating IP Network Settings Automatically 1. In the Discovery pane, select the device and click Connect . 2. From the System tab click the Obtain an IP Address automatically check box. 3. Type in a Device Name for example, FrontLobbyCamera01. 4. Click Apply. The network automatically assigns the IP Address based on the DHCP network server details. If no DHCP server is present on the network, the hardware defaults to an APIPA address (169.254.x.x). Document 800-04195 Rev B 35 11/09