Honeywell HNVE1 Reference Guide - Page 64
Configuring a Preset, Table 5-3, Reserved Presets, Preset, Function
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Encoder and Device Configuration Table 5-3 Preset 71 72 73 - 74 75 76 - 79 98 99 Reserved Presets Function Reserved Recover encrypted PIN Reserved Administrator logon screen Reserved Camera Reset Nightshot On/Off Configuring a Preset 1. Select the PTZ Dome Setup tab (see Figure 5-3 on page 62). 2. Position the dome (pan and tilt) and adjust the camera lens (zoom, focus, and iris) using the PTZ Control (see Figure 4-5 on page 49). 3. Click Program to display the on-screen menu and using the keyboard, type in a new number from 001 to 160, then press Enter. 4. Type in a title for the preset and press Enter to display the following options: Table 5-4 Example of PTZ Dome Programming Functions 'C' to Change Name Location 'E' to Edit Preset 'D' to Delete Preset 'S' to Save Preset 'N' to Save Name Use the arrow keys to reposition the location of the preset title on the video screen. Modifies the preset set in step 3. Deletes the preset number entered in step 3. Saves the current settings for the preset number entered in step 3. Saves only the title entered in step 4 for the preset number entered in step 3. The PTZ and iris settings are not saved. 5. Select an option using the keyboard. 6. When complete, configure another preset by returning to step 1 or press Esc to exit the menu. Going to a Preset 1. Select the PTZ Dome Setup tab. 2. Under Preset Details, click . The OSD menu opens. 64