Honeywell HNVE1 Reference Guide - Page 63

PTZ Camera Address Settings, Presets,

Get Honeywell HNVE1 PDF manuals and user guides View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

HNVE1 V2.1 1-Channel Encoder Reference Guide PTZ Camera Address Settings For the PTZ dome and the HNVE1 to be able to communicate, the PTZ switch settings on the PTZ dome and the HNVE1 encoder must be the same. The PTZ dome switch settings must agree with the logical address of the PTZ ID. The default setting is 0001. For example, for the ACUIX High Speed dome, the address selection is via rotary switches SW1, SW2, SW3, and SW4. Figure 5-4 Location of Address Rotary Switches on Sample PTZ Main Board Switches SW1, SW2, SW3, and SW4, from top to bottom. Presets Table 5-2 Address SW1 SW2 SW3 SW4 Sample PTZ Dome Address Switch Settings Value Units digit Tens digit Hundreds digit Thousands digit For more about PTZ dome switch settings, please refer to the reference guide provided with your PTZ dome. A preset is a saved dome position (pan, tilt, zoom) and lens setting (focus and iris). You can configure a preset to save a PTZ dome position. Presets enable you to quickly move the PTZ dome to a particular position while monitoring an area. Presets can be grouped and sequenced into Preset Tours. When viewing video from a configured preset, the number and name display in the top left corner of the screen. There are 161 presets (0 to 160). PTZ dome positions can be saved in all the presets except preset 71, 72, 73, 75, 98, and 99. These presets are preconfigured for functions such as resetting cameras and others. Document 800-04195 Rev B 63 11/09

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
HNVE1 V2.1 1-Channel Encoder Reference Guide
Document 800-04195 Rev B
63
11/09
PTZ Camera Address Settings
For the PTZ dome and the HNVE1 to be able to communicate, the PTZ switch settings on
the PTZ dome and the HNVE1 encoder must be the same. The PTZ dome switch settings
must agree with the logical address of the PTZ ID. The default setting is 0001.
For example, for the ACUIX High Speed dome, the address selection is via rotary switches
SW1, SW2, SW3, and SW4.
Figure 5-4
Location of Address Rotary Switches on Sample PTZ Main Board
Table 5-2
Sample PTZ Dome Address Switch Settings
For more about PTZ dome switch settings, please refer to the reference guide provided with
your PTZ dome.
Presets
A preset is a saved dome position (pan, tilt, zoom) and lens setting (focus and iris). You can
configure a preset to save a PTZ dome position. Presets enable you to quickly move the
PTZ dome to a particular position while monitoring an area. Presets can be grouped and
sequenced into Preset Tours. When viewing video from a configured preset, the number
and name display in the top left corner of the screen.
There are 161 presets (0 to 160). PTZ dome positions can be saved in all the presets except
preset 71, 72, 73, 75, 98, and 99. These presets are preconfigured for functions such as
resetting cameras and others.
Address
Value
SW1
Units digit
SW2
Tens digit
SW3
Hundreds digit
SW4
Thousands digit
Switches SW1, SW2, SW3, and
SW4, from top to bottom.